would a loose remote wire on amp cause amp to get hot , or wireing 4 6x9 2 100 watt rms , and 2 60 watt rms speakers to a 1200 watt amp wrong bridged cause it to get hot
thankyouforansweringyoucouldnthavebeenmorerightonwithhurtingmyfeelingredrobbin youtookbasicspellingandgrammer right
oneofthethingsthatmakesiteasierforustohelpyouisusinggoodsentencestructureandpunctuationsowecanfollowalongwithyourthougthsandquestions
youprobablyhaveshitwiredwrongwithalowresistanceloadandtheampisgoingintothermalprotect
regardlessfixyourlooseremotewire
We tease a little bit here, just wanted to give you a little grief as a warm welcome to build the thickness of your proverbial skin. No real hurt intended, my apologies.thankyouforansweringyoucouldnthavebeenmorerightonwithhurtingmyfeeling
I used 3 awg power wire and 8 awg ground and 16 awg remote and 16 awg speakerWe tease a little bit here, just wanted to give you a little grief as a warm welcome to build the thickness of your proverbial skin. No real hurt intended, my apologies.
Do you think that could be it, though? Have you checked the final resistance with a multi-meter? You may just need to reconfigure.
o beIs it a mono amp? You might also want to consider a method of wiring that doesn't involve the amplfieir being bridged. Since your dealing with speakers that should be playing stereo signals and all.
i got a package i got to put together that i sold on ebay and mail it it may be a minute before i answer back thank you for talking to me i have learned a lot from watching you tube videos and reading about ohms and running series and parallel but theirs still a lot i dont know and ill understand if it seems like it would be a lot to take on to help me . when i want to learn something ill seek it out on the internet instead of just sitting their saying i dont know howim so sorry if you go to a different question titled a girl needs help i asked yesterday it has all the info i forgot the specs were not in this question. another question they want you to use huge wire for the amps but the part you connect it to you can hardly if at all get the whole wire to fit in the hole
o be
did you see my other question i posted and yes diagrams really help alotSometimes diagrams are the easiest way to understand the wiring thing. Just keep reading and teaching yourself, you will pick it up.
We'll all be here in the meantime.
so basicly your saying to run the 4 six by nines one per channel would be the best for the amp or speakers or sound?did you see my other question i posted and yes diagrams really help alot
Don't be a puss bro, I thought it was hilarious.thankyouforansweringyoucouldnthavebeenmorerightonwithhurtingmyfeeling