worklog, boxbuild, pics... four cw12's

[DaGh0st 5,000+ posts]

Looks great man, cant wait to see some vids of this thing

 

[mobeious 10+ year member]

Bro turn it around face it foward trim it and seal it of make it a wall

 

[jeepintn 10+ year member]

well, just got everything put in, tested it out, and im not happy, something cant be right, im gonna try and turn the box around tomorrow as suggested... it is just NOT loud at all

 

[jeepintn 10+ year member]

well, here it is... the final product. the subs face the front, with the amp being mounted on the back of the amp in the rear. i MIGHT try facing the subs up to see how it sounds, but we'll see, anyways, here it is.

reppin' the low hz

back of box

front of box

 

[9512ds 5,000+ posts]

sorry to hear it isnt loud enough for you my man

 

[Bolognablake 10+ year member]

Is your polarity right on the drivers? If you stick a 9-volt, or your cordless drill battery on the input terminals on the box, do all the drivers move in the same direction?

Depending on where you are in Nashvegas, I could help you figure something out in the next few days.

 

[jeepintn 10+ year member]

sorry to hear it isnt loud enough for you my man

now that i turned the box to the front, it is MUCH MUCH MUCH better. like night and day. but still just a bit low, not much though, its probly inthe 150 area. i may look into selling my amp and investing in a more powerful one. maybe 2 2500d's //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[NeverEnuffBass 10+ year member]

now that i turned the box to the front, it is MUCH MUCH MUCH better. like night and day. but still just a bit low, not much though, its probly inthe 150 area. i may look into selling my amp and investing in a more powerful one. maybe 2 2500d's //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Told ya //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[smd4life 5,000+ posts]

thats right folks, that fake 0 gauge speaker wire

 

[jeepintn 10+ year member]

Is your polarity right on the drivers? If you stick a 9-volt, or your cordless drill battery on the input terminals on the box, do all the drivers move in the same direction?
Depending on where you are in Nashvegas, I could help you figure something out in the next few days.

i hooked them all up the exact same way, and when it first wasnt loud enough, my first thought was to check the polarity, and one of them was off, so i fixed that and turned the box around, MUCH better now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[NeverEnuffBass 10+ year member]

i hooked them all up the exact same way, and when it first wasnt loud enough, my first thought was to check the polarity, and one of them was off, so i fixed that and turned the box around, MUCH better now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

now that it is aimed forward, build panels to "seal" it off from the back. I garantee you will be more than happy with the results. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[jeepintn 10+ year member]

now that it is aimed forward, build panels to "seal" it off from the back. I garantee you will be more than happy with the results. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

is that how u did yours?

 

[jeeper07 5,000+ posts]

YGPM homes lmk something

 

[coolahan 10+ year member]

sweet bro

 

[MA$E 10+ year member]

looks sexy