worklog, boxbuild, pics... four cw12's

[jeepintn 10+ year member]

That's not going to be loud at all //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

umm.. what?

 

[jeepintn 10+ year member]

ok guys.. heres a few more pics from today, i think im gonna call it a day for now...

yes, i know my worktable is an old dryer, im poor, haha

and this is as far as i got today, might add some round wooden dowel for bracing, but this is about all

 

[NightHawkFG 10+ year member]

d**n a massive enclosure for some massive sub.

 

[jeepintn 10+ year member]

yea, about 9.3 after port, sub, and bracing...

 

[TwistedMovistar 10+ year member]

is it me or do those subs looked used? looks like a puncture hole in one of the surrounds? is that so?

 

[Slowd N Throwd 10+ year member]

looking like a mad beast, cant wait to see this finished

 

[jeepintn 10+ year member]

i can assure you they are brand new, and that puncture hole must just be something on the surround, i just went and checked them to make sure, and theres no hole on any of them, im not sure what that is in the picture

 

[NeverEnuffBass 10+ year member]

nah, it leaves about 3 inches clearance, the rear hatchs opening isnt as tall as the ceiling, so i had to make it fit where i could take it in and out... BTW... just finished baffles, should have pics up soon

Ah ok. Cause when I was making mine it just fit in by like a 1/8 of an inch. I'm praying I don't have to take it out anytime soon.//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 

[j3bus2k3 5,000+ posts]

This may sound really dumb but I'm curious...whats the lip in the front for?

 

[mtdewelf 10+ year member]

nvm, comprehension>me

 

[j3bus2k3 5,000+ posts]

Haha, I edited my post after seeing yours...question above remains OP...

 

[jeepintn 10+ year member]

This may sound really dumb but I'm curious...whats the lip in the front for?

Haha, I edited my post after seeing yours...question above remains OP...

well, basicly cuz the lip makes it a snug fit between the rear seats and the rear hatch, that way the box wont slide, rather than bolting it to the floor

 

[mazdakid 5,000+ posts]

the first pic first sub looks like its ripped

 

[jeepintn 10+ year member]

well, heres the last update of the day, got a second wind and went ahead and added some bracing and the top... so its basicly finished not except for the carpeting... anyways, here ya go, let me know what ya think...

adding some bracing

added the top and some more bracing

first test fit... like a glove!!

 

[mazdakid 5,000+ posts]

**** you should turn it around, put the seats down, and put the port at the bottom