Worklog: 4 SX 15's wall setup in a Durango *Pics*

[NeverEnuffBass 10+ year member]

hopefully things will change once u get the kinks worked outie: amp and sub

80

I hope so, otherwise I'm gonna be pissed //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif

 

[DaGh0st 5,000+ posts]

looks great.

 

[Pyro_By_Nature 5,000+ posts]

They're barely moving, probably because the bassline in LNT is around the claimed tuning freq.And it could also be due to impedence rise.

Put two memphis 4,000 watt amps on em' and watch them go up in a smoke show.

 

[NeverEnuffBass 10+ year member]

Gonna try and go buy a digital multi meter tonight and get those gains set properly. I'm really hoping impedence rise isn't going to become an issue for me, any suggestions?

 

[TypeRBass 10+ year member]

Gonna try and go buy a digital multi meter tonight and get those gains set properly. I'm really hoping impedence rise isn't going to become an issue for me, any suggestions?

ehhh impedence rise is always an issue unless you have a tiny *** box.

 

[NeverEnuffBass 10+ year member]

ehhh impedence rise is always an issue unless you have a tiny *** box.

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif I don't know too much about it. guess I'm gonna have to look into it.

 

[Pyro_By_Nature 5,000+ posts]

Impendence rise is the devil.

 

[NeverEnuffBass 10+ year member]

Impendence rise is the devil.

I bet it is.

 

[tommyk90 5,000+ posts]

Impendence rise is the devil.

x2

When i had a pair of eD nine.1's strapped to my type-r, we clamped them and found out that i was rising to 6 ohms:crap:

Getting a whopping 700 RMS out of the PAIR

 

[TypeRBass 10+ year member]

x2
When i had a pair of eD nine.1's strapped to my type-r, we clamped them and found out that i was rising to 6 ohms:crap:

Getting a whopping 700 RMS out of the PAIR

lol when i had 2 viper 2500.1's and 2 L7 12's my rise was 5.7 ohms on each amp //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif getting a whopping like 900 watts out of each.

 

[NeverEnuffBass 10+ year member]

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Now you guys really have me scared... Is there a solution to impedence rise besides smaller enclosures?

 

[tommyk90 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Now you guys really have me scared... Is there a solution to impedence rise besides smaller enclosures?

Not really. lol

Impedence rise has waaaaay too many factors that affect it. Resining an enclosure generally raises the impedence, as does having an enclosure that flexes/doesn't flex.

There's really no set in stone ways to raise/decrese impedence rise. It is VERY dependant on the vehicle, enclosure, and the equipment itself.

 

[btnhfan 5,000+ posts]

Looks great.

Manny has a clamp.

Stop by and throw it in and then you can cry from the impedance lol.

 

[DBfan187 5,000+ posts]

wanna lower your impedence? make your box flex

 

[TypeRBass 10+ year member]

wanna lower your impedence? make your box flex

ha...or another solution is to wire your amps down LOW.