wiring nine.2x

[crakerhead 10+ year member]

can someone help me, im trying to think of how im gonna wire 2 sets of 6500s components to nine.2x. they are 4 ohm sets.

Click to read more...

 

[Venom 10+ year member]

you should have gotten a NINe.4

 

[imaspaceguy90 10+ year member]

yea, 2 channels wouldnt be good for 4 speakers. But you should just combine the fronts , 1 channel and abcks another. but that would be 8 ohms. I dont know how it would work out mang/

 

[crakerhead 10+ year member]

could i wire 2 left + wires together and 2 left - wires together and input into left terminal on amp and do same for right side? maybe i screwed the pooch by getting a nine.2x, i assumed i could wire it like this for a 2 ohm load. if i trade this off for nine.4, how could i wire that to get 2 ohm load?

 

[Venom 10+ year member]

you can wire one set just fine, but that's alot of power for two components...at 8 ohms, you would probably be getting the right amount of power, but it's a waste of an amp...get a woofer with 600 rms (Ov.2)or two with 300(Kv.2) rms and use the amp for that...then you can get a good 4 channel hiphonics amp for around $200...you'd have a good sounding set up...just curious, why are you doing two comp setups...

 

[crakerhead 10+ year member]

i guess wire like this but just imagine the speakers are each 2 ohm? being as the comp set is a total 4 ohm?

 

[crakerhead 10+ year member]

2 b/c my car originally had 2 sets of comps, well the comps can take a lot of power

 

[davidfre21 5,000+ posts]

parallel the wires from the xovers

 

[crakerhead 10+ year member]

awesome, thanks!