wiring it up.

[audiobahnuser18 5,000+ posts]

Alright guy's usually i can do wiring np with sub's an amp. but i usually have a wiring diagram with me. but on this i don't i was wondering if anyone know's how i wire my DLS A3twin amp to my two 15 inch audiopipe apbl's? i know newbee question sry.

Click to read more...

 

[galacticmonkey 5,000+ posts]

Its a 2 channel amp right? If its a 2 channel, this is how its wired:

Heres the wiring for 2 ohm and 4 ohm subs.

 

[audiobahnuser18 5,000+ posts]

But also man it say's bridged by the speaker wires. so it can be bridged also?

 

[galacticmonkey 5,000+ posts]

Wait, so the amp is bridged internally?

 

[galacticmonkey 5,000+ posts]

Anyways, heres a list showing ways of wiring. I really dont understand what youre saying so just pick the one you need.

http://www.crutchfield.com/S-Tazl86hNuay/learningcenter/car/subwoofers_wiring.html

 

[audiobahnuser18 5,000+ posts]

here's amp specs. but i also heard this amp is very under rated.

http://ampguts.realmofexcursion.com/DLS_A3/

 

[audiobahnuser18 5,000+ posts]

Anyone know? i don't wanna fck up this amp or subs at all?

 

[Audio Master 10+ year member]

hey J hows it here is a link to wire the subs up in the box so you only have a pos and a neg wire coming from the box put the pos into 1 of the channels pos and the neg into the other channel neg and you will be golden

http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=22

this will show you what loads you can do its pretty much .5ohm 2ohm and 4ohm only

so which ever one of those will give you the right power in bridged mode will work my suggestion is the 870wrms on the 2ohm bridge so wire the subs in the box according to the 2ohm wire diagram ok and connect as ive written above and thats about the best you can do unless they are duel 1ohm subs or duel 4 ohm subs or whatever then basically there is a wizard at the top of the page just key in the number of subs and the ohms and click calculate and whalla diagrams to wire in the box and then connect it to the amp as ive written at the top

 

[audiobahnuser18 5,000+ posts]

Oh sweet thanks man that's great appericate it man.