robertark
10+ year member
Alpine Fan
I have everything ordered and shipped (except the box, waiting for bassman3), but before I go any further I just want to double-check with how everything will be wired to make sure it's right. Of course, I'm not going to do anything until I get the subs installed in the box //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif.
Firstly, here's the equipment...
The subs will be wired down to 1Ω @ 1500W RMS (2x750ish watts).
I drew a picture with photoshop to make my life easier.. Can you guys let me know if this is right or if I'm missing anything? Thanks //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif
Also, could I use a 250A isolator instead, since I'm using a 250A fuse? Or not? Just figured that the isolator probably wouldn't see 500 amps, so use a 250?
Firstly, here's the equipment...
- 2 - Type-R 12", Dual 4Ω VC
- MB Quart DSC 1500.1D
- 0gauge wiring kit (250A ANL fuse)
- Kinetik HC1800 Battery
- 500A battery isolator (need to order)
The subs will be wired down to 1Ω @ 1500W RMS (2x750ish watts).
I drew a picture with photoshop to make my life easier.. Can you guys let me know if this is right or if I'm missing anything? Thanks //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif

Also, could I use a 250A isolator instead, since I'm using a 250A fuse? Or not? Just figured that the isolator probably wouldn't see 500 amps, so use a 250?