wiring comps

[IshbOO 10+ year member]

I am planning on buying some cdt ef-61CF with the carbon fiber cone, would these be better than the carbon paper cone? on the cdt ef-61? Also the cdt ef-61s come with the 480 crossovers. Or would any other >200$ comps that are nice? These are 150w rms, and i they are 4ohm. What Impedance would I wire down to and how many channels would my amp need?

Click to read more...

 

[SSS 18734 5,000+ posts]

1. wire them to seperate channels (either on a 2 or 4 channel amp)

2. Bridge together 2 channels (on a 4 channel amp)

 

[IshbOO 10+ year member]

and i would need to wire to 4 ohms? so id need an amp lets say 150x2 @ 4ohms? or could i wire to 2 ohms?

 

[SSS 18734 5,000+ posts]

no, you cannot wire to two ohms... unless you wired two speakers to one channel, but that would be just plain stupid //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

look for an amp that does the power you want at 4 ohms.

 

[IshbOO 10+ year member]

thanks alot