Wire Info....

[bgowdy 5,000+ posts]

"""Bullz Audio 1/0 gauge wire""". This will just be used as multi power and ground runs from front to back battery. Just looking for some info. I just wondering if its decent, not wanting bashing the brand just want to know if its decent

Click to read more...

 

[av83 10+ year member]

"""Bullz Audio 1/0 gauge wire""". This will just be used as multi power and ground runs from front to back battery. Just looking for some info. I just wondering if its decent, not wanting bashing the brand just want to know if its decent

he11 no. don't do it.

 

[bgowdy 5,000+ posts]

he11 no. don't do it.

So its not even just "ok"

 

[av83 10+ year member]

So its not even just "ok"

no. go here for cheap ofc 1/0 right now. Results for Monster 1/0 - Audio Savings

to answer your question... no. it's not. not when for only marginally more you can get waaaaaaay better. It's poor-quality, undersized, cca.

 

[CAT MAN 5,000+ posts]

cadence on left bullz on right both 0 gauge

 

---------- Post added at 04:02 AM ---------- Previous post was at 04:02 AM ----------

 

id get audiotechnix if i were you

 

[bgowdy 5,000+ posts]

cadence on left bullz on right both 0 gauge

 

---------- Post added at 04:02 AM ---------- Previous post was at 04:02 AM ----------

 

id get audiotechnix if i were you

The bullz dont look that bad honestly. If i did get it again it would be multiple runs of it. But i will look at the AT wire to

 

[TheUnderFighter 10+ year member]

I see no reason not to go with AT for myself. It's very competitively priced. I know without a doubt, it's absolutely top-notch. Well over-sized, and exceptionally flexible. There's too many closely priced, quality options, to go with Bullz.

 

[bgowdy 5,000+ posts]

@TheUnderFighter; I also just came across IMC audio 1/0. I think you posted in the thread. And i guy said he used it and it actually worked well. As long as its decent it should be ok. Again im doing multi runs of of it

 

[av83 10+ year member]

The bullz dont look that bad honestly. If i did get it again it would be multiple runs of it. But i will look at the AT wire to

The cadence he had it next to isn't very big either. If your doing multiple runs, then cca will work fine. Audiotechnix is great stuff, and Vertex Audio is selling 50 ft rolls of Shok 1/0 cca for $70.

 

[TheUnderFighter 10+ year member]

The cadence isn't large, but it is true 1/0. As it the Bullz. But the Bullz isn't ofc, and it's not very flexible. It's really OK wire. But I'd rather spend a few more dollars and get WAY better wire.

 

[bgowdy 5,000+ posts]

The cadence isn't large, but it is true 1/0. As it the Bullz. But the Bullz isn't ofc, and it's not very flexible. It's really OK wire. But I'd rather spend a few more dollars and get WAY better wire.

Ok. So what about the IMC Audio wire

 

[av83 10+ year member]

Ok. So what about the IMC Audio wire

Lol, it's only a few dollars more for respectable cca. There's a reason why people aren't calling bullz, imc, raptor, etc. ” bang for your buck” stuff.

 

[bgowdy 5,000+ posts]

Lol, it's only a few dollars more for respectable cca. There's a reason why people aren't calling bullz, imc, raptor, etc. ” bang for your buck” stuff.

Ok... So what do you recommend as bang for your buck 1/0 gauge wire because thats what im after. Im jjust looking for some i can get in bulk thats cheap. Im going to be doing 2 - 3 runs for power and ground. The runs are only going to be about 12.5 ft each.

 

[jteske88 10+ year member]

i had a bullz 2 gauge kit and my 4 gauge i had installed already had same diameter of wire strands. **** ebay.

 

[bgowdy 5,000+ posts]

i had a bullz 2 gauge kit and my 4 gauge i had installed already had same diameter of wire strands. **** ebay.

But the diameter dont always matter. Its the strand it self. The 2 gauge i have now aint huge in diameter, the strand in what i have are thick. I dont want to buy more of it because its expensive lol. Im just trying to multi run wire. And not wanting to spend out the ***. Thats why i said im going to eitha double or triple up the wire no matter size/quality in order to reduce resistance