will it handle it daily??

[azzkikr 10+ year member]

Hi everyone,

I have two rl-p's on the way and want to know if they will handle my NINe.1 at 1ohm daily in a 1.25cuft. box. (1.25 per chamber) I am guessing that my nine.1 puts out about 1500 rms at 1ohm and 14.4v. Will thay handle it everyday? I want these to last for a long time. THANX in advance.

Click to read more...

 

[SSS 18734 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/yes.gif.2d6d3882a589966b8145fbc57db57f33.gif

I've heard of people running them over 1000RMS daily a piece. I say set the gain to about 600 RMS per sub, and that way you wont really strain the subs or the amp.

 

[azzkikr 10+ year member]

Okay

What is the best way to get an estimate on the output? I know I should use a dmm but I don't have one or even access to one. Is it in anyway the same as a AC,DC current tester. I also can measure impedance. Is there a way to use this stuff to find out??

 

[SSS 18734 5,000+ posts]

OkayWhat is the best way to get an estimate on the output? I know I should use a dmm but I don't have one or even access to one. Is it in anyway the same as a AC,DC current tester. I also can measure impedance. Is there a way to use this stuff to find out??

an AC DC current tester / impedance meter? sounds like a DMM to me //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif. Check out the gain setting tutorial in the amplifier section

 

[azzkikr 10+ year member]

Alright, wasn't sure if they were or not. Thanks for the help.

 

[Spkrman]

sure.. a nine.1 wired to 1 ohm will give you between 500 and 750 actual watts after imp rise, lets not factor in voltage //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif. Is that typical, yep.