why isn't this loud?!

[954runner 10+ year member]

check the settings on the hu.

been there done that //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[SQBubble 10+ year member]

check the settings on the hu.

lesbo orgyyyyyy FTMFW:yumyum: //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[SQBubble 10+ year member]

does anyone have any experience with those cavalier things that connect the voice coils on the type r's? i think for some reason that they are my problem

i dont get it...//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

wuts cavalier?

 

[954runner 10+ year member]

lesbo orgyyyyyy FTMFW:yumyum: //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

sounds good to me

i think we are gonna swap amps tomorrow and see what the deal is. and check the wiring on the sub

 

[954runner 10+ year member]

i dont get it...//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gifwuts cavalier?

its like a small cable that connects the voice coils and lets you choose between how you want to wire the subs (2 ohms or 8 ohms)...basically a small speaker wire, the voice coil connections are right next to each other

 

[954runner 10+ year member]

ok so tomorrow i'm going to:

1) check the ground on the amp

2) check the wiring of the sub

3) change input sensitivity

4) swap out amps

 

[snoopdan 5,000+ posts]

You need a TCAb box..... *runs and hides*

 

[shooked 10+ year member]

cavalier=banana plugs? i have the same box with a 12in type r and it gets loud off of a mrp-m650.

 

[endosj3 10+ year member]

yeah i'm not sure what it would be but i actually have my type R on 400 RMS at 4 ohms and it hits pretty hard in a small prefab ported box...granted my car is kinda open since its a hatchback not a trunk, but still....its even kinda loud outside the car

 

[tommyk90 5,000+ posts]

its like a small cable that connects the voice coils and lets you choose between how you want to wire the subs (2 ohms or 8 ohms)...basically a small speaker wire, the voice coil connections are right next to each other

I use those plugs and have never had a problem with them.

 

[squeak12 10+ year member]

Maybe you should check the other settings on the amp then report what they are set at. All the positives should be wire together. Same for the negatives.

 

[Wonderbread 5,000+ posts]

After you double check all your connections, swap the amp or swap the sub. Easiest way to nail down where your problem is is to change the components //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Hydrastas 10+ year member]

Remember to take the scientific approach... Only have one idependent variable at a time now. I'd definitely go with just putting your amp in his car and seeing if its any louder.

 

[Johnny Drama 5,000+ posts]

Dmm the coil

Swap the amp if its wired right.

Swap amp back and change sub if that doesnt fix it.

Come to my house if you need a 12" I have an extra mag sitting in the garage that can handle 1kw. EDIT...its a D2 so it would have to be wired at 1 or 4 ohms.

 

[Twistid 5,000+ posts]

im the one who sold him the bx 1500 , did you check the gains like you said ? i had the gains set a little over 1/2 way with 0 bass boost and it never went into protect on me , 100% working condition