All subs are 10". Looking for something relatively inexpensive and a decent SQ but can get real loud when need be.
EDIT:
I've decided to go with the GPs
(2) Crunch GroundPounders: http://cgi.ebay.com/2-CRUNCH-GROUND-POUNDER-10-2000-WATT-CAR-SUBWOOFERS_W0QQitemZ230339773540QQcmdZViewItemQQptZCar_Subwoofers_Enclosures?hash=item35a1520464&_trksid=p3286.c0.m14&_trkparms=72%3A1234%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50
What amp should I be using and how can I wire them?
This is what I was thinking:
If I go with the GPs which model should I get they are available in DVC 2 ohm or 4 ohm
I was thinking about these amps:
Crunch GVP2000.1
RMS: 1000 watts x 1 @ 2ohms
or the
Crunch P1800.4
RMS 450x2 @ 4ohms
The P1800.4 is about $50 cheaper and for basically the same power. Would I be able to wire up either up these sub models and make them able to fit these 2 ohm or 4 ohm load configurations?
Thanks for all the help guys. I'm in finals week and can't look up all this technical stuff on my own right now.
EDIT:
I've decided to go with the GPs
(2) Crunch GroundPounders: http://cgi.ebay.com/2-CRUNCH-GROUND-POUNDER-10-2000-WATT-CAR-SUBWOOFERS_W0QQitemZ230339773540QQcmdZViewItemQQptZCar_Subwoofers_Enclosures?hash=item35a1520464&_trksid=p3286.c0.m14&_trkparms=72%3A1234%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50
What amp should I be using and how can I wire them?
This is what I was thinking:
If I go with the GPs which model should I get they are available in DVC 2 ohm or 4 ohm
I was thinking about these amps:
Crunch GVP2000.1
RMS: 1000 watts x 1 @ 2ohms
or the
Crunch P1800.4
RMS 450x2 @ 4ohms
The P1800.4 is about $50 cheaper and for basically the same power. Would I be able to wire up either up these sub models and make them able to fit these 2 ohm or 4 ohm load configurations?
Thanks for all the help guys. I'm in finals week and can't look up all this technical stuff on my own right now.