wheres my remote wire..

[Boomboy 10+ year member]

ok update, i got it working, but onother problem. i get sound out of the subs but its so little its not even funny, with the bass boost all the way up on the remote and amp i barely get a sound but it is there.

 

[Boomboy 10+ year member]

amp is on, lights are on power light is on, protect is off.

 

[shaneb 10+ year member]

whats your gains set at?

make sure its not out of phase

Edit: things that need to be changed after seeing your video..not flaming, just like, safety reasons.

1. put a grommet on that fire wall penetration, its rubbing bare metal and it WILL short to ground eventually.

2. What is the yellow wire that is also going through firewall. Hopefully not your remote turn on.

3. Why two inline fuses? If amp has none, I understand.

4. Reset the power wire in the inline fuse under the hood, it's fraying and you are just waiting for a short to ground.

5. for aesthetic purposes, please retuck those wires, i understand if you were just wanting to get it hooked up to hear it, but hide wires under carpet. it makes everyone feel better.

 

[Boomboy 10+ year member]

ok new problem, got it working with gains and stuff, pushed in deck back into hole and then everything shut off. checked all fuses and connections and everything is fine. deck or amp wont turn on now

 

[Horsemanwill 10+ year member]

check fuses

 

[Boomboy 10+ year member]

check fuses

i did

 

[Boomboy 10+ year member]

any other things i should try

 

[jdawg 5,000+ posts]

you pinched a wire somewhere? Are you using tape?

 

[Boomboy 10+ year member]

you pinched a wire somewhere? Are you using tape?

just screw it...im gonna take it to ams, i was installing a different deck anyway.

/thread

 

[fast85_gt]

any thoughts

do you have one that says power antenna if so thats it