where to find 3/0 butt connectors?

[dragnix 5,000+ posts]

Can't seem to find it at the local electrical store, do i need to look in a marine store for it? Help please.

Click to read more...

 

[kovemaster559 5,000+ posts]

just solder it and heat srink it

 

[mlstrass 5,000+ posts]

use ring terminals and connect them with a nut/bolt and tape it up. Otherwise some copper tubing with the wire inserted on each end and smashed down...

 

[dragnix 5,000+ posts]

just solder it and heat srink it

tried it, hard to do that

use ring terminals and connect them with a nut/bolt and tape it up. Otherwise some copper tubing with the wire inserted on each end and smashed down...

both are pretty good ideas

 

[kovemaster559 5,000+ posts]

ahhhhh its not that hard my uncle has a huge solder iron that ****ing melts the solder tough 1/0 . its a big *** solder it works good

 

[SSS 18734 5,000+ posts]

In your butt. LOLOLOLOLOLOLOLOLOLOLOLOLOL

http://www.wiringproducts.com/index1.html

 

[king ranch 5,000+ posts]

use ring terminals and connect them with a nut/bolt and tape it up.

does that really work

and doesnt cause a loss of power

 

[dragnix 5,000+ posts]

In your butt. LOLOLOLOLOLOLOLOLOLOLOLOLOL
http://www.wiringproducts.com/index1.html

what what. I'd prefer locally since i don't want to pay extra for shipping

does that really work
and doesnt cause a loss of power

i'll have to try and see

 

[SSS 18734 5,000+ posts]

what what

Search "3/0 butt" and you'll get tons of them on that site. Insulated, non insulated, shrink wrapped, etc.

 

[king ranch 5,000+ posts]

do it and let me know i might do that to add on wire to my stock wiring so i dont ahve to run all new wires since some are so short there isnt enough to hook them up to my new battery

but then again its no different than using a dist block or a fuse holder so yea should work fine

 

[dragnix 5,000+ posts]

ahhhhh its not that hard my uncle has a huge solder iron that ****ing melts the solder tough 1/0 . its a big *** solder it works good

well see, i don't have that

 

[dragnix 5,000+ posts]

do it and let me know i might do that to add on wire to my stock wiring so i dont ahve to run all new wires since some are so short there isnt enough to hook them up to my new battery
but then again its no different than using a dist block or a fuse holder so yea should work fine

as long as there's a tight connection, i'm sure it's all good

 

[king ranch 5,000+ posts]

yea thats true i just dont have trust in butt connectors on wire that big u know

haha

 

[kovemaster559 5,000+ posts]

well see, i don't have that

use a crack torch. i know you smoke crack!

 

[dragnix 5,000+ posts]

yea thats true i just dont have trust in butt connectors on wire that big u know
haha

it's not the butt connectors, it's the bolt that goes in the middle to hold them down //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

use a crack torch. i know you smoke crack!

crack torch ain't that big ho