What class would I run in?

[ace_800 5,000+ posts]

Ok seeing as this will be my first actual comp, others were local one. I have no idea what class I am. I'm running an inline 250amp fuse atm but switching it out to a 100 or 150amp. Its near the stock battery that runs to the kinetik in the back then to the amps, both the eclipse and exile listed in sig.

I don't have any mods or anything cut. sub is below the window line. Anyone help?

Click to read more...

 

[bhsdriller 10+ year member]

here's their class rating

http://www.mecacaraudio.com/2011rulebook/2011%20SPL%20Pressure%20Classes%20p6.pdf

what is that amp rated at 1ohm? I think there's power limits in each class now, going off rated power

 

[ace_800 5,000+ posts]

Its rated at 2400@1ohm, I'm running at 2 ohm thou. Appears either AS3 or S3. Shit...thats with 1 10.

 

[bhsdriller 10+ year member]

Its rated at 2400@1ohm, I'm running at 2 ohm thou. Appears either AS3 or S3. Shit...thats with 1 10.

as3 is car off playing music

s3 car on with tone of whatever you want

 

[ace_800 5,000+ posts]

Well, my batteries are pretty stout for music when off. Just not really sure if I'm looking at this correctly.

 

[97maxima 10+ year member]

amp would have you in s2 if fusing and cone area permits

 

[ace_800 5,000+ posts]

amp would have you in s2 if fusing and cone area permits

How'd you come up with s2 if I'm fused at 100-150?

 

[97maxima 10+ year member]

missed that part. s3 it is lol

 

[ace_800 5,000+ posts]

Yeah, doubt I can run lower than 150amps seeing as I'm pulling ~1600 from the exile and 500 from the eclipse. I called exile today and was told it actually does 2000@2 and 2400@1, not stable at 4.

 

[97maxima 10+ year member]

Yeah, doubt I can run lower than 150amps seeing as I'm pulling ~1600 from the exile and 500 from the eclipse. I called exile today and was told it actually does 2000@2 and 2400@1, not stable at 4.

you can //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif i ran my 500.1 at .5 on 2 80s in s3 and now i run 2 o2 audio 2500s at 1 ohm strapped on a pair of 80s

 

[bhsdriller 10+ year member]

I can run my bc5500 @ .5 on a 150

All you need is to have it hold long enough to put up a score

 

[Davecubs14 10+ year member]

Ok. If you are not a member and are not trying to earn points, they will go by your amp rating since you actually do not have proper fusing. So you will be put in either as 2 or street 2 unless your box is over your back seats or you have the amp or batteries outside the cargo area. If you want to put a fuse on your system to count, it'll have to be between the back battery and your sub amp. Other amps do not matter. And I have ran an 80 amp fuse on a aq 2200 at 1 ohm for even daily, did not blow it so you'll be fine. Good luck