What are these specs rated at?

[ArrizX 10+ year member]

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=5223

I plan on buying that amp Powerbass ASA-600.4

But it says this

* 4 ohm Power : 100W x 4

* 2 ohm Power : 200W x 4

* 4 ohm Mono Power : 400W x 2

* Peak Power : 1600W

* Total Harmonic Distortion :

* Frequency Response : 20Hz - 22,000Hz

* S/N Ratio : >94 dB/W/M

* Damping Factor : >150

* Input Sensitivity : 0.5 - 4.0 volts

* Crossover Slope : 12 dB

* High-Pass Crossover Freq : 40Hz - 250Hz

* Low-Pass Crossover Freq : 40Hz - 250Hz

* Variable Subwoofer EQ : 0/+18 dB

* Subwoofer EQ Frequency : 40Hz

* Dimensions : 14.9" x 9.3" x 1.9"

* Dimensions : 380mm x 238mm x 48mm

ASA600.4 - Powerbass 4 Ch 1200 Watt Power Amplifier ASA 600.4

So, my speakers will be at 4 ohms. Will I really see that many watts? Or is taht rated for like 14.4volts. See, my jeep charges at 14.4 volts but battery sits at like 12.7 or whatever is standard. So I'm not sure what voltage my amp will see. Maybe the voltage the amp will see is 14.4 because ill be using this when its running.

Helpp...

Click to read more...

 

[terra 5,000+ posts]

with ur car on the amp will see 14.4. off itll be around 12.5

 

[ArrizX 10+ year member]

so then i should actually see 100watts per channel, right?

 

[dragnix 5,000+ posts]

yes, as long as the car is running

 

[ArrizX 10+ year member]

perfect. now I just need to decide if I want this one or the cheaper PB one that does 60 per channel.

I finally measured and I need a PB because their so **** thin lol.

 

[ArrizX 10+ year member]

thanks for the help guys