What amp?

  • 5
    Participant count
  • Participant list
for 190 you can get a Hifonics Brutus 1000D (will put 700rms-800rms@1ohm) that is perfect for those 2 subs

 
Can we please make this a sticky!!!!! Or at least mandatory reading for this section...

http://www.rockfordfosgate.com/rftech/wiringwizard.asp

To answer your question. You need at least 600 watts at either 1 or 4 ohms. If you show the amp a 4 ohm load you have abot 7454785 different choices of 2 channel amps that will do the job. Likewise, if you show the amp a 1 ohm load you have 5421 different choices of 1 ohm stable mono amps to choose from. This is aside from MANY other amps that can pull double duty and run both your subs and other speakers in you car. So, in total you have right around 3254978556 different choices here bro. Sorry to be such a smart ass....but DO YOUR HOMEWORK FIRST, ASK QUESTIONS NEXT!!!!!!!!!!!!!!!

Oh, and good luck:)

 
Can we please make this a sticky!!!!! Or at least mandatory reading for this section...
http://www.rockfordfosgate.com/rftech/wiringwizard.asp

To answer your question. You need at least 600 watts at either 1 or 4 ohms. If you show the amp a 4 ohm load you have abot 7454785 different choices of 2 channel amps that will do the job. Likewise, if you show the amp a 1 ohm load you have 5421 different choices of 1 ohm stable mono amps to choose from. This is aside from MANY other amps that can pull double duty and run both your subs and other speakers in you car. So, in total you have right around 3254978556 different choices here bro. Sorry to be such a smart ass....but DO YOUR HOMEWORK FIRST, ASK QUESTIONS NEXT!!!!!!!!!!!!!!!

Oh, and good luck:)

already is a sticky

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
164
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
394
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
702
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
511

About this thread

mkell

10+ year member
Member
Thread starter
mkell
Joined
Location
STL
Start date
Participants
Who Replied
Replies
8
Views
567
Last reply date
Last reply from
Chevyaudio
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0

New threads

Top