Wanting to downgrade:

5.3bowtie
10+ year member

CarAudio.com Elite
Rating: 100%
15 0 0
Hey guys. I have decided I want to downgrade my system and wanted to see if anybody was wanting to upgrade theirs.

I have a 10" kicker soloX (silver cone dual 1ohm coils) and an Atomic 3000.1 (2000@2ohm, 3200@1ohm, could be run a .5ohm with proper electrical 4000@.5ohm?)

I am not looking for any trades straight across as the reason I am doing this is to get a little extra money and still have some bass in the truck at the same time. The amp and sub combo is run at 2ohm daily and has only been wired to .5 ohm once for roughly 10 min and the amp was not hot to the touch.

Idealy I would like a 10 or12 that works good in a sealed box and an amp to match. Show me what you have or pm me.

Also, if anyone is interested I will have a lot of 0 ga. wire aswell as 3 0 ga. fuse holders and fuses, an isolator and a stinger sp800. Thanks.

Thomas

 
I have a IXOS, Audiopipe, and Stinger fuse holder (all ANL) with 4 300 amp fuses. I have about 12-15ft. of Kicker hyperflex (can get exact dimensions tomorrow if you like) and 2 pieces of Stinger HMP each about 8-10ft. long.

As for the amp, I do not have the original packaging (I am the second owner and it was not sent to me in original packaging. Bought if from cha0 on here.) It has a few minor cosmetic scratches on the top but otherwise is in perfect condition. I would give it a 9 cosmetic and 10 mechanical. I could also get pics tomorrow if you like. It is still installed in my truck at the moment.

In the trade department I am mainly looking for a single 10 or 12 that I will run sealed and an amp to push it. Would prefer to trade for this + cash because I need the money part for another project, that is the reason I am down grading. Let me know what you have and I will get back to you on the other stuff tomorrow.

Thomas

 
Allright....Only 10" I've got is a Rockford HE..//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif and a 8" DD 1008a.

What you lookin for as far as cash, shipped to 75041 on the Atomic amp....and then how much shipped on the 12-15ft of Kicker Hyperflex 1/0 ?

 
I have a rockford 1500.1 db POWER amp does 1100 at 2Ohms and a bit over 1500 at 1 ohm....I have two rockford fosgate t1 12" they handle 600 rms a piece. Let me know

 
Allright....Only 10" I've got is a Rockford HE..//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif and a 8" DD 1008a.
What you lookin for as far as cash, shipped to 75041 on the Atomic amp....and then how much shipped on the 12-15ft of Kicker Hyperflex 1/0 ?
you have pm.

 
So ported is out of the question? My 10'' BL does real well in 1.25-1.5cubes, ported obviously.
Well the whole point of the downgrade is to still have bass in the truck and money left over to go twords another project. I think the BL would probably be a little more expensive than I am wanting to go. Thanks though.

Thomas

 
The amp is sold.

Audiopipe fuse holder sold.

Still up for grabs.....

10" kicker soloX

2 runs Stinger HMP 0 ga. (8ft.)

1 Stinger 0 ga. ANL fuse holder

1 IXOS 0 ga. ANL fuse holder

1 Stinger battery isolator

1 Stinger sp800 battery

Trades looking for: amp 300-400 watts @ 4ohm, 4 ga. wire for amp. Thanks.

Thomas

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

5.3bowtie

10+ year member
CarAudio.com Elite
Thread starter
5.3bowtie
Joined
Location
Detroit, MI
Start date
Participants
Who Replied
Replies
23
Views
1,119
Last reply date
Last reply from
5.3bowtie
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top