Walling off a mustang

randyhays

Junior Member
That's right I want to wall off my 98 mustang and port my box into the trunk. Im going to use 2 15 kicker L7. All I need to know is exactly how to do it. I want the best design on how to port it into my trunk and everything. If you could please let me know what I have to do. I have a professional carpenter to help me all we need to know is exactly how its done. thank you

 
What? Why would you port a wall into the trunk?

I'd suggest you do some major research before you fuck something up. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Ok maybe I wrote it wrong. But I did my research I'm just not sure how to to write it. The guy explained it as if I was using my trunk for air space. Make anymore since like that?

 
Because I wont have enough air space unless i use my trunk. Only way I can think of it as if I used from just behind me back as air space with the speakers facing forward? Ringing a bell now?

 
Ok maybe I wrote it wrong. But I did my research I'm just not sure how to to write it. The guy explained it as if I was using my trunk for air space. Make anymore since like that?
you can build a wall with part of it going into the trunk for added airspace but the port would be in the cabin or just have a sealed wall

do some searching on here before you do anything

 
your sayin port facing truck and subs facing foward. Ghey, Most of your noise will be in the trunk. If you have enough room to do a fawking wall then you have enough to do a normal box.

 
Yeah there we go sorry for typing the wrong thing that's what I was talking about. And I was getting how to do it so he can build it neither one of us have built a box like this. And I did mean use the trunk for air space have the port coming into the cab. My bad should have seen that didn't make since before I posted it.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
181
Any indication that a loose wire may be the issue? I'd start by checking all the +/- connections to see if one has come lose or is starting to...
1
587
Disconnect the RCA's or hi-level input to the JBl amp. turn the system on, If the noise continues, it's a ground or noise issue with the amp.If it...
1
553
yall. I unplugged the radio harness and the antenna and plugged it all back in and it works. I guess its fixed… suppose it was the head unit...
3
837
Thank you all for all the replies, I intend to reply to each and every one individually as I test things out. Here's the latest development that...
13
1K

About this thread

randyhays

Junior Member
Thread starter
randyhays
Joined
Location
Perry, Fl
Start date
Participants
Who Replied
Replies
20
Views
1,116
Last reply date
Last reply from
Ellsworthz
1716349996025.png

SPLBassJunkie

    May 21, 2024
  • 0
  • 0
1000008028.jpg

Mr FaceCaser

    May 20, 2024
  • 0
  • 0

New threads

Top