VW Caddy for SPL from Ukraine !

Talking about one heavy azzed vehicle??? I hope that suspension will hold up. Deff not going to do well on the road. Flat bed vehicle. Awesome build concept. Very Interesting, and alot of work involved
 
So what's going on behind the car. Power supply lithium manganate, all connected by copper strips. All these subwoofers will be powered by two amplifiers. The power of each amplifier is 28K = 28000Watt nominal (1Ohm). As a result, we get about 56K at the output, taking into account that our connection to each amplifier will be 0.35Ohm - we, even taking into account the growth of impedance, have excellent power.
 

Attachments

  • 124.jpg
    124.jpg
    207.5 KB · Views: 93
  • 651.jpg
    651.jpg
    182.4 KB · Views: 95
  • 5456.jpg
    5456.jpg
    220.6 KB · Views: 108
  • изображение_viber_2021-08-18_15-41-12.jpg
    изображение_viber_2021-08-18_15-41-12.jpg
    182.6 KB · Views: 71
  • изображение_viber_2021-09-15_17-36-41.jpg
    изображение_viber_2021-09-15_17-36-41.jpg
    198.9 KB · Views: 88
The first start was made in order to understand the weak points of the car. On a broken windshield, our first result was 160.3DB with a power of 17000W. The glass turned out to be weak, we tried 3 methods of gluing, it does not help, so we ordered armored glass!
 

Attachments

  • 123-09-15_17-44-21.jpg
    123-09-15_17-44-21.jpg
    226.8 KB · Views: 107
  • 884.jpg
    884.jpg
    185.5 KB · Views: 110
  • 1256.jpg
    1256.jpg
    220.8 KB · Views: 102
  • 5512.jpg
    5512.jpg
    232.1 KB · Views: 113
  • изображение_viber_2021-09-15_17-44-21.jpg
    изображение_viber_2021-09-15_17-44-21.jpg
    203.9 KB · Views: 61
doors, loud doors. We tried to approach the hardness of the door with a special approach. Sealant and aluminum profile, inside it is a frame for fixing the skin.
a protective part will be added to the front part later, it will also be decorative
 

Attachments

  • изображение5746.jpg
    изображение5746.jpg
    186.9 KB · Views: 57
  • 987.jpg
    987.jpg
    216.2 KB · Views: 111
  • изображение_viber_2021-08-30_09-07-45.jpg
    изображение_viber_2021-08-30_09-07-45.jpg
    231.8 KB · Views: 71
  • 3351.jpg
    3351.jpg
    216.1 KB · Views: 125
  • 1245.jpg
    1245.jpg
    227.1 KB · Views: 138
after replacing glass and minor improvements, the result has changed. At the moment it is 163 + Db with a power of 18K.
The next step is to disassemble the door and reinforce it with a metal square around the perimeter. The corner of the door moves very strongly, so this must be fought ...
 

Attachments

  • 0-02-05-2279197016fd808325c771d1dec0cf392d5fa4d393386396160f58095f4d8ca4_9a1db099.mp4
    1.5 MB
Perhaps you have an idea of where to dig next and what to do? Now we want to get maximum efficiency from this power. And when there will be a great result, give our large supply of power amplifiers.
 
Activity
No one is currently typing a reply...

Similar threads

I mean if your wanting to go cheap and you like making things i guess you could always make your own , is all you really need is a DMM a...
3
942
Excellent place to get a Tuned enclosure with everything Precut and ready to put together with a Diagram of each sheet Marked. $190 bucks. All you...
15
2K
You're not going to know until you test with a meter. Typically even carpeting a box as opposed to painting is going to lose a few tenths.
3
1K
Highest my car has done is a 156. I have 1200w on highs and recently swapped the mids to pro audio mids. This was a challenge as I find many of...
6
945
im not looking to seal off im trying to stay out of wall classes and plan on staying in trunk classes
15
3K

About this thread

Bratishev_Artem

CarAudio.com Newbie
Thread starter
Bratishev_Artem
Joined
Location
Ukraine
Start date
Participants
Who Replied
Replies
41
Views
9,441
Last reply date
Last reply from
Bratishev_Artem
1000006564.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0
1000006569.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top