*VID* 2 10" D6's in a TCAB .....finally got metered..

[Spkrman]

yea i know bass boost is bad but i dont have a head unit with sub level stuff so i need that bass boost on my amp or else the subs barely are audible no joke

it could just be that you aren't getting enough voltage out of the LOC... so you have to crank everything up. Its possible... the Q is how much louder can it get //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[kotec123 10+ year member]

yea tru that

 

[Lil Poot 5,000+ posts]

tell you what, if you can build me a ported box for my rl-p's, tuned to 30-32 hz, that will fit in my ***** am without removing the back seats, or completely blocking the back window, i'll GLADLY give ya 300 bucks.

 

[saywhat? 5,000+ posts]

I meant, it DID get loud //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
One of the nastiest trunks I've seen.. and its still pretty dam loud for the equipment being used. Doesn't sound too bad either.

Some new front speaks, a real head unit (lol) and it would be a pretty sweet setup //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

try working in an 05 mustang.

 

[Spkrman]

try working in an 05 mustang.

too late //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

It was a shipped box... so I have no idea how it sounded. Happy customer, but you never know how loud it actually is.

I've also worked in a handful of the late 90's, early 00 mustangs.... same story.

The vids and pics account for a small fraction of the actual boxes I build and ship - the great majority get shipped all over the place.

 

[Lil Poot 5,000+ posts]

ever done a ported box for a third gen f-body?

 

[saywhat? 5,000+ posts]

how big was the box u did for this 05 mustang....and how exactly did it sit in the trunk.

 

[Spkrman]

how big was the box u did for this 05 mustang....and how exactly did it sit in the trunk.

was no room for anything fancy, so it was right around 2 cubes for one 12.

 

[Spkrman]

ever done a ported box for a third gen f-body?

no //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif . No space for much of anything.

 

[saywhat? 5,000+ posts]

ported i take it? im sure with some tens, a lot is possible. reason why im tryin 2 tens.

PS----im fitting 3.2 cubes.

 

[saywhat? 5,000+ posts]

if u care for the demensions, id be nice enuff to share. but i will try to get metered once its done. dont know exactly what subs i will have yet though. hopefull some W6's or D6's

 

[Spkrman]

ported i take it? im sure with some tens, a lot is possible. reason why im tryin 2 tens.

PS----im fitting 3.2 cubes.

Make sure you leave plenty of room for a decent size port.

I'd say 2 10's is the absolute most you can stuff in.

 

[Lil Poot 5,000+ posts]

i still think it can be done, if i took the sealed box that i built, made the same box but brought it up to the backs of the back seats, it would give me well over 5 cubic feet. the only problem is where and how to position the ports. do you sell plans also, or only complete boxes?

 

[Spkrman]

i still think it can be done, if i took the sealed box that i built, made the same box but brought it up to the backs of the back seats, it would give me well over 5 cubic feet. the only problem is where and how to position the ports. do you sell plans also, or only complete boxes?

boxes only - and that is the biggest issue... the port location. There is no room for a good, SOLID design.

 

[saywhat? 5,000+ posts]

Make sure you leave plenty of room for a decent size port.
I'd say 2 10's is the absolute most you can stuff in.

im aiming at 2 10 inch D6's like this guy. that would be awesome. would two 4 inch aero ports be good for this? (would prolly use PVC for comformability)

is this too much port, or just enuff or what?