Very noob basic paralel question (2 SVC)

[Roid_monkey 10+ year member]

How do I do it? I think you just twist the 2 negatives and the two positive's together, then put the twisted negs and positives to the terminals on the amp

Click to read more...

 

[jbizzle 5,000+ posts]

http://www.crutchfield.com/learningcenter/car/subwoofers_wiring.html?imageID=2SVC%5F4%2Dohm%5Fmono

 

[Roid_monkey 10+ year member]

that wont be possible because it is 2 separate chambers.

 

[kross 10+ year member]

How do I do it? I think you just twist the 2 negatives and the two positive's together, then put the twisted negs and positives to the terminals on the amp

Yes, that will work fine.

 

[patotay 10+ year member]

that wont be possible because it is 2 separate chambers.

it'll work buddy..how many subs and voice coils do you have though

 

[Stel 10+ year member]

that wont be possible because it is 2 separate chambers.

Why not?

 

[skadude016 5,000+ posts]

that wont be possible because it is 2 separate chambers.

2 separate chambers? what?

yes that is how you get to a 2 ohm load with 2 4 ohm speakers

 

[unrated 10+ year member]

that wont be possible because it is 2 separate chambers.

drill a small hole through the chamber and run the wire through to the other sub

 

[dman4486 5,000+ posts]

drill a small hole through the chamber and run the wire through to the other sub

IF you do this, make sure you run the wire through and seal the hole

IF you have 2 terminal cups on the outside of the box, then just do as you were saying and connect the + together and the - together at the amp