Very 1st glassing project~ *PIXPIXPIX*

[flakko 5,000+ posts]

really? it seems fine the way it is now...well ill see how hard it is tomorrow. if its still to weak ill mat the mofo.

 

[PRIVATEpastry 10+ year member]

Did you use mat on the backing?

 

[flakko 5,000+ posts]

your rite lol okay ill put some mat on it its still too flimsy but look its all shiny once i put a coat of resin on it!

maybe i wont need to carpet it...

and i started on the right side:

 

[supa_c 5,000+ posts]

If you do use the mat+resin you will need a nice coat of body filler on there.

 

[Buckshot 10+ year member]

If you do use the mat+resin you will need a nice coat of body filler on there.

And if your not careful with that bodyfiller, you can expect to sand your balls off (//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif) trying to get it smoothe.

** TOS: If you take the sanding your balls off comment slightly too literally, and end up with no balls, I will not be held responsible. **

 

[PRIVATEpastry 10+ year member]

What you should do, is mat the inside of the enclosure, this way you won't need to use body filler.

Or as much body filler...

 

[flakko 5,000+ posts]

^^^^ i like that idea it will take a crapload of work, but its better in the long run rite?

 

[PRIVATEpastry 10+ year member]

It will save you a TON of time sanding. I woulda done that on my amp rack, but it was an odd shape, so I couldn't...

 

[flakko 5,000+ posts]

hey wat about some ss on the inside of those kicks instead of extra matting?

 

[PRIVATEpastry 10+ year member]

ss?

 

[flakko 5,000+ posts]

oops hehe Second skin. I got some hazmat i needa use up

 

[UndercoverPunk 5,000+ posts]

hey wat about some ss on the inside of those kicks instead of extra matting?

how about extra amtting then a layer of deadner

 

[flakko 5,000+ posts]

will htat suffice? cuz i dun wanna use all the resin i have cuz i still have another project to do.

 

[ruckus]

Its really your choice. You dont have to worry about flexing and stuff with comps like you would with a sub box. I would recommend using a layer of mat on the inside but it is not mandatory. you can also mix mat in with the bondo and lay that inside it is called kittyhair they sell it premixed at advanced auto but you can do it yourself and save on $$$.

 

[PRIVATEpastry 10+ year member]

Hey, flakko, how's that hazmat? Better than damplifier?