Used torrez and could use some opinions

[mrpep]

So here is a pic of my design on torrez. I am still not sure if I could do better but there seems to be alot of empty fields like in the misc , just not sure I understand these correctly. I am putting a pioneer champion series pro 12'' in there. My plan is to have it laying on its side with a port on its side like the pic seen below , its a pretty basic layout. I am hooking it up to a Peavy CS800X amp which was made for DJ's etc and then to my surround sound system for movies and music. I want it to lay next to the couch and it will replace my current 8" which is nice but would like a little more. So please take a look at my torrez specs and let me know what you think? one more thing, the biggest question I have is where does the sub hole go? I have the specs for the box on torrez but what about the hole? sub location? I dont see that on the spec sheet.

the torrez pic is small, how do I expand ?

Click to read more...

 

[Massive spl]

U have a single 12" in 4cubes with 8" per of port. Not good man... Also woofer should be next the port like all the way to the right of the box

 

[mrpep]

3" port, tunes out to 30 Hz which is appealing to me. Net Volume is 4.92 ft3.

draft 2 torrez.txt

 

[Massive spl]

U can still get 30hz tunning but u need like 12-14" per port most likely will sound better.

 

[mrpep]

the port is 14.5 tall x 3 opening x about 21'' long into the 24' box . The attachment is small , ***** - I'm not sure how to make a larger pic in here.

 

[mrpep]

http://s300.photobucket.com/user/mrmanuel1234/media/rough%20draft%202_zpsbo69ceed.png.html?sort=3&o=0

ok, this should be better - I think I like this cause its a bit smaller than my first design and it still get 30 hz. The thing is where do I place the subwoofer location?