*UPDATE* Amp shut off in middle of a song

[WaCk071]

So after finding time to inspect my amp further, I check the power line coming from my battery, and the fuse completely melted off the side that is going to the amp, I don't know why this happened. I'm planning on buying a new fuse soon, but I don't want it to melt again, so does anyone know why or how that would happen? Thanks for the help again!

Sent from my Pixel using Tapatalk

Click to read more...

 

[Popwarhomie 5,000+ posts]

Poor connection= resistance= heat.

 

[BOOMINGRANDPA 5,000+ posts]

what size wire and fuse? have u been using this amp for a while no problems? check ground at amp make sure no wires pinched/cut anywhere..

 

[WaCk071]

Poor connection= resistance= heat.

Where would the poor connection come from?
Sent from my Pixel using Tapatalk

 

[WaCk071]

what size wire and fuse? have u been using this amp for a while no problems? check ground at amp make sure no wires pinched/cut anywhere..

It's 4 gauge with 60 amp fuse and I've had the amp for a month and have had no problems until now
Sent from my Pixel using Tapatalk

 

[BOOMINGRANDPA 5,000+ posts]

Where would the poor connection come from?
Sent from my Pixel using Tapatalk

something got moved and ground wire or any wire can get a tad loose., ground ring shouldn't move at all

 

[BOOMINGRANDPA 5,000+ posts]

It's 4 gauge with 60 amp fuse and I've had the amp for a month and have had no problems until now
Sent from my Pixel using Tapatalk

well looks like u need new fuse holder anyway so get 80-100amp like this (i have new one sitting here waiting on terminals to install all end of week) if u order it make sure u tell them 100 amp fuse on paypal (i forgot had to order some they sent 60a) https://www.ebay.com/itm/In-Line-Car-Audio-APX-MAXI-Blade-Fuse-Holder-4ga-12V-24V-32V-DC-10-100A-Fuse/251628654761?hash=item3a963c90a9:g:LW8AAOSwGUBZ7MZX

 

[WaCk071]

something got moved and ground wire or any wire can get a tad loose., ground ring shouldn't move at all

I'll have to find a better ground
Sent from my Pixel using Tapatalk

 

[WaCk071]

well looks like u need new fuse holder anyway so get 80-100amp like this (i have new one sitting here waiting on terminals to install all end of week) if u order it make sure u tell them 100 amp fuse on paypal (i forgot had to order some they sent 60a) https://www.ebay.com/itm/In-Line-Car-Audio-APX-MAXI-Blade-Fuse-Holder-4ga-12V-24V-32V-DC-10-100A-Fuse/251628654761?hash=item3a963c90a9:g:LW8AAOSwGUBZ7MZX

I got the other end of the fuse out it was just stuck in the fuse holder, so I bought some new fuses for now but I'll have to order some bigger fuses
Sent from my Pixel using Tapatalk

 

[Popwarhomie 5,000+ posts]

Where would the poor connection come from?
Sent from my Pixel using Tapatalk

Poor quality fuse block or terminals were not tight enough.

 

[THATpurpleKUSH 5,000+ posts]

Poor quality fuse block or terminals were not tight enough.

Beat me to it. I've had the same problem happen. Don't use cheap fuse holders.

 

[audiobaun 5,000+ posts]

https://www.ebay.com/itm/XSCORPION-GOLD-WATERPROOF-MINI-ANL-Fuse-Holder-0-2-4-Gauge-Car-Amplifier-Install-/273013215953

This is the type of fuse holder you need under the hood, an ANL fuse, and waterproof be best.These are made by Stinger which are pretty solid blocks that last and are pretty much some of the best blocks ive ever used and still use today.You are currently using a very Cheap AGU fuse holder of which is very low quality and generally used for amp inline fuse holders of up to 60-80 amps max,and are very unpredictable as to lasting or made of good quality.Never cheap out on your main Supply blocks or inline fuse blocks.You can choose your fuse size/amperage at check out. Id recommend getting at least two more fuses to place in your console to carry for future needs.ANL fuses are pretty much bullet proof and work fantastic

 

[audiobaun 5,000+ posts]

well looks like u need new fuse holder anyway so get 80-100amp like this (i have new one sitting here waiting on terminals to install all end of week) if u order it make sure u tell them 100 amp fuse on paypal (i forgot had to order some they sent 60a) https://www.ebay.com/itm/In-Line-Car-Audio-APX-MAXI-Blade-Fuse-Holder-4ga-12V-24V-32V-DC-10-100A-Fuse/251628654761?hash=item3a963c90a9:g:LW8AAOSwGUBZ7MZX

Sir, that is some Cheap junk.. Please dont recommend stuff like this for main supply needs for others

 

[hispls 5,000+ posts]

If your fuse holder is melting it is NOT a fault with your ground it is with the fuse holder (or just the fuse) or you did not have it good and tight. The heat is being created at the point of resistance not 15 feet away!

 

[BOOMINGRANDPA 5,000+ posts]

Sir, that is some Cheap junk.. Please dont recommend stuff like this for main supply needs for others

tried to find 4 ga one on gp but all i saw was 1ga.. may pm him see if he has 1 cause i just bought that cheap 1 cause mine in 13 yrs old, now i don't wanta install it.. i have 5 100a maxi blade fuses so wanted to use those and stingers i see say 20-80a..