TheMayer 10+ year member
Member
CDT ES-02 "Tweeters" (250-20kHz)
Rainbow Sound line 6.5" Midbass' (50-4250Hz)
Ported 12W6v2
No rear fill
Fully active w/ a BitTen D
50W per front driver, 500W to Sub (Alpine MRP)
Tweeters are mounted in on axis pvc end caps where the dash and A-pillars meet, mids off axis low in the doors.
Ive been playing around with different crossover points with this setup for a while and just can't seem to get it right, especially in the mid bass department. If i recall correctly I've got highs crossed at 600Hz 24db Linkwitz, mids from 80-1000Hz 24db Butterworth, sub at 80Hz 24db Butterworth.
Any suggestions/advice to achieve better blending and imaging I'm all ears!
Thanks in advance
Rainbow Sound line 6.5" Midbass' (50-4250Hz)
Ported 12W6v2
No rear fill
Fully active w/ a BitTen D
50W per front driver, 500W to Sub (Alpine MRP)
Tweeters are mounted in on axis pvc end caps where the dash and A-pillars meet, mids off axis low in the doors.
Ive been playing around with different crossover points with this setup for a while and just can't seem to get it right, especially in the mid bass department. If i recall correctly I've got highs crossed at 600Hz 24db Linkwitz, mids from 80-1000Hz 24db Butterworth, sub at 80Hz 24db Butterworth.
Any suggestions/advice to achieve better blending and imaging I'm all ears!
Thanks in advance