los33
Car Audio G
Need opinions on an average box size needed for two 18" hdc4's inverted.
Weight has become an issue due to lowering and mods soon to be done on my truck.
I "can" do a wall, but this would require custom made suspension coils for a lowered sierra to hold more weight without sagging in the front.
So any ideas would be great. If possible i might have it made and shipped if not to large or i will build it.
As far as tuning it will be tuned to 35hz and i do not care if it is aero, octo, slot port.
@Boomsday & @CSCStang & @Che&\#1071;RyMan
Sent from my draconis using Tapatalk
Weight has become an issue due to lowering and mods soon to be done on my truck.
I "can" do a wall, but this would require custom made suspension coils for a lowered sierra to hold more weight without sagging in the front.
So any ideas would be great. If possible i might have it made and shipped if not to large or i will build it.
As far as tuning it will be tuned to 35hz and i do not care if it is aero, octo, slot port.
@Boomsday & @CSCStang & @Che&\#1071;RyMan
Sent from my draconis using Tapatalk