Tuning Amp

[Dustano 10+ year member]

I just finished building my reg cab ported box for a 10. It is 2 cubes and tuned to 32 hz. On my amp i have 3 settings: level, subsonic filter and low pass filter. How do i set these? From what i think is right i put the subsonic filter at the same frequency that my box is tuned at because i don't want any frequencys below that and the low pass filter blocks off any frequencys above what i set it at and the level is just the gain. Is that correct or am i off somewhere?

Click to read more...

 

[squeak9798 5,000+ posts]

what i think is right i put the subsonic filter at the same frequency that my box is tuned at because i don't want any frequencys below that

At the same frequency or half an octave lower (24hz), either way is fine.

and the low pass filter blocks off any frequencys above what i set it at

Yup, probably be set somewhere between 50hz and 90hz

and the level is just the gain.

Yup