Trying to set Kicker Amp

[Crazy4CarAudio 10+ year member]

Ok, I know how to set the gains to match voltage, but my question is...

the crossover control. Not really understanding where I should set this to, but I noticed that while gains are set according to VAC # needed and adjusting the crossover control, if I turn it to the middle are, it reaches the most voltage on my meter, then in either direction. Does this mean anything?? Like is it better if I set it at this point, for it might peak the most at the certain frequency??

Bass boost is still left at zero, cause not understanding where to set with the bass knob.

BTW my boxes are tuned to 35HZ if that makes a difference.

Click to read more...

 

[DejaWiz 5,000+ posts]

LP 80 Hz is where I'd start (and likely leave) it.

 

[Crazy4CarAudio 10+ year member]

ok, yet thats not really answering my ?. trying to figure out if at that point if it has any effect of performace, i think, lol.

 

[luvinthebass 5,000+ posts]

will depend on the frequencies in the music duh

 

[Crazy4CarAudio 10+ year member]

So your saying if I play a 35Hz tone and look at my voltage meter and adjust the crossover freq. to the highest voltage reading, the amp will peak at 35 Hz?

 

[DejaWiz 5,000+ posts]

My apologies, I did misunderstand your question.

 

[Crazy4CarAudio 10+ year member]

So nobody knows the answer then?