Trying to power (2) Kicker DVC CVR's 12-2-ohm...

[debro012]

What's good?

Trying to Power two Kicker Dual voice coil CompVR 12's 2ohm. For those that do not know, they are rated at 800 watts rms, and 1600 watts max. I have been looking at the following Amps and I need some help on choosing one:

1. Kenwood 9105 [900x1 @ 2ohms]

2. Kicker 10ZX750.1 [750x1 @ 2ohms]

3. Kicker 10ZX1000.1[1000x1 @ 2ohms]

4. MTX TE-801D [800x1 @ 2ohms]

5. Rockford Fosgate T1000-1bd [650x1 @ 2ohms]

6. Rockford Fosgate T1000- 1bdcp [1000x1 @ 2ohms]

Not concerned about the price as much as I am giving these subs the best power for performance. I need an amp that's not gonna shut off every ten minutes due to overheating. They can only be wired to 2ohm or 0.5ohm, and planning on running at 2ohms... all help is welcomed, and feel free to suggest any other amps... Thanks...

Click to read more...

 

[wevie 10+ year member]

What's good?
Trying to Power two Kicker Dual voice coil CompVR 12's 2ohm. For those that do not know, they are rated at 800 watts rms, and 1600 watts max. I have been looking at the following Amps and I need some help on choosing one:

1. Kenwood 9105 [900x1 @ 2ohms]

2. Kicker 10ZX750.1 [750x1 @ 2ohms]

3. Kicker 10ZX1000.1[1000x1 @ 2ohms]

4. MTX TE-801D [800x1 @ 2ohms]

5. Rockford Fosgate T1000-1bd [650x1 @ 2ohms]

6. Rockford Fosgate T1000- 1bdcp [1000x1 @ 2ohms]

Not concerned about the price as much as I am giving these subs the best power for performance. I need an amp that's not gonna shut off every ten minutes due to overheating. They can only be wired to 2ohm or 0.5ohm, and planning on running at 2ohms... all help is welcomed, and feel free to suggest any other amps... Thanks...

What enclosure do you have?

In a sealed enclosure they are rated 800 peak, 400 rms. In a ported enclosure the rating goes down.

 

[debro012]

thanks for replying... They are in a sealed box. I went ahead and ordered the Kenwood 9105D, for now. suggestions are still welcome...

 

[swollen_cu 10+ year member]

Aq1200d.