tryin to help my lil sister get a budget system

MOFOMAN
10+ year member

Senior VIP Member
151
0
Michigan
im trying to put together a $200-300 system for my sister hears what im looking at

(2) Kenwood Kfc-w3013ps 12 (single 4 400rms each) Atrend E12D B Box Series

(3) Sony Xplod XS-GTR120L 12 (single 4 380 rms each) Atrend E12tp 12-Inch Triple Crown Compact Sealed

Package: (2) Pioneer Champion TS-W309D4 12" 2800 Watt Peak / 800 Watt RMS Dual 4 Ohm Car Subwoofers + Atrend E12D Dual 12"

still unsure about the amps i know the (2 12") will be on 500rms an the (3 12") will be 1000rms

 
Don't go 3 12's sealed. If her goal is to get loud then 2 ported 12's over 3 sealed will do it. Of your choices I'd say the Pioneers. Why not go Craigslist? You can probably get her a couple CVR's for around 100-120 bucks and then get an Audiopoop 1300 mini and BOOM! Your @ around 225 bucks and making noise.

 
get an sa-8, port it, throw it on 800-1000 watts and call it a day

or get two sa-8's and put them between 1200 and 1500 watts... look for used equipment though.

on craigslist you can either find deals of the century or people trying to rip you off on brands such as MTX and Rockford Fosgate because they dropped over a grand in their local shop on 500 watts of power and two P2's in a prefab.

 
Hmm I would rather go with used stuff in the classifieds. You can get a pair of Sundown or Incriminator 10s for under ~120 and then get a 500w amp for around 60-70 bucks, then get your wiring kit for around 30 bucks and a prefab box for 30-50 bucks. I think a dude has 4 SD2.0 10's in the classifieds for cheaaappp and you can throw a pair in a cheap box on 500w.

 
see if you can still get on with this pre sale C2 subs, last time i heard they are almost sold out on the pre order since they are only doing the first 100 subs.

These are $99 each, either get one for $99 shipped and run on apsm 1300 $105 at 3 kings audio

or

or get 2 for $200 shipped and run an apsm 1500 $125

presale on Sub 12" 600watt $99

C2 Audio Threatcon-2

Threatcon-2-2T.jpg
Threatcon-2-3.jpg
Threatcon-2-4.jpg
Threatcon-2-5.jpg


Specifications:

12" Threatcon-2 Subwoofer

600 Watts RMS

Available in Dual 4 Ohm and Dual 2 Ohm

Dual 2 Ohm: Threatcon-2 12d2

Dual 4 Ohm: Threatcon-2 12d4

3" Copper 4 Layer Voice Coil

Double Stacked 160 oz Magnet

High Current Flat Woven Tinsel Leads

Dual Spider Pack

Dual Stitched Non Pressed Paper Cone-

with Mid Excursion Foam Surround

Enclosure Recommendations:

Sealed: 1.0 - 1.25 ft^3

Ported: 1.5 - 2.0 ft^3 @ 35hzSealed: 2.0 - 2.50 ft^3

Ported: 3.0 - 4.0 ft^3 @ 35hz

T/S Parameters:

FS: 36.7HZ

VAS: 40.9 DM3

QES: .44

QTS: .40

BL: 16.8

MMS: 167.7G

SENS: 91.5 DB

XMAX: 28 MM

Woofer Dimensions:

EXT DIA: 12.48"

CUT OUT DIA: 11.18"

MOUNT DEPTH: 5.82"

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Got it figured out! Thankfully a friend just found out about KunKonceptz UBT-20 terminal adapters that allow multiple connections to my type 94...
3
501
Turn the volume completely down and operate ot normally. This is to see if it is the built in amplifier that is shutting down. If the radio does...
1
412
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
542
Dammned good speakers. Just pass up the CL series,and you will be pleased with CDT speakers. I still enjoy all mine. Polk MM series and Infinity...
4
575

About this thread

MOFOMAN

10+ year member
Senior VIP Member
Thread starter
MOFOMAN
Joined
Location
Michigan
Start date
Participants
Who Replied
Replies
13
Views
742
Last reply date
Last reply from
BrownVanMan
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top