Trunk wangins Danali xl 7KW 4 HDC318 build

Oh and guys' date=' playing it LOUD my voltage only drops to 12.6:)[/quote']
Then I'm definitely doing something wrong. I'm dropping below 12v with a 200a alt, s1200 and d3100, on only 3000w.
 
lol it was already ran like this. dropped to 12 full tilt with 2 hdc3 12's. amps never got over cold.
This may be the case, however you were probably doing less than half of the power you think you were continuously.

Clamp it before and after the alt and more batts and see what you get.

 
This may be the case, however you were probably doing less than half of the power you think you were continuously.Clamp it before and after the alt and more batts and see what you get.
lol then its still alot of power. enough to bottom out hdc3's on any song //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif but right now its very loud and its just going to keep getting louder and louder //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif ill clamp it today and get some HD flex vids too

 
clamped it and well..... we are getting around 5150 watts at 2.45 ohms on a 35 hz burp just goofing around. not that bad but when we get two more batts and an alt i expect a little more. i have a crappy i mean very crappy inside flex vid too. ill make an out side flex one tomorrow.

 
here is the first vid. ill have the one where we clamped it up later. right now its not in hd tho so ull have to wait //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif


 
new vid... you know before the amps and everything explode and catch on fire...lulz //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif


 
wtf does no one understand how a charging system works? i ran my sound stream XXX10000k with the stock battery, 3 kinetik 1800's, and a stock 102amp alt for months at .75, yes after a long time of bumping it around (2 hours) i would have to turn it down for about a half hour for it to come back up to 14.5 lowest it ever dropped was 12.7. yes and i do know the amp only does around 5000Wrms.

 
vid of sub excursion. they still got WAY more in them //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

EXCURSION VID

yes i know i sound retarded. we were tryin to get outta there fast plus it was cold as balls lmao //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I too generally use the factory carpet to make my templates. It's also a good idea to put layer of butyl damping material under the MDF too...
7
802
If the amp is already part of the unit, with the amp built in, you would need a power supply, something like this: Or sell that amp amp and...
2
1K
It will probably change your tuning. I've seen bigger numbers off of much less power from walling at the rear seats, but Terry "trunk king" Brock...
1
1K
Thanks all for your responses! In regards to the dB meter suggestions, I ended up using my Blue Yeti microphone which supposedly can handle up to...
4
1K

About this thread

Notloud00

10+ year member
Quiet
Thread starter
Notloud00
Joined
Location
Everywhere
Start date
Participants
Who Replied
Replies
74
Views
6,735
Last reply date
Last reply from
Notloud00
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0
all out.jpg

Popwarhomie

    Jun 2, 2024
  • 0
  • 0

New threads

Top