Alex JB
10+ year member
Senior VIP Member
Ok, so I kno you guys will give me a load of crap if I jusr sketch up a spape in google sketcher, that's not my intention, but I will be modeling it in there just to develop a cut list and give me a visualisation for my build.
the box is shown upside down, subs will downfire, port will be out the end with 3 - 4" of space before the rear door.
the sketched line shows the path of the air through the port to the outside
My worry is that the space I have is a really bad shape for the position of the subs with reference to the top of the box and the distance between the subs and the port.
Is the end opening for the port a bad place to put it? right now it gets me the right port area and maximises the length I can get.
Thoughts?
the box is shown upside down, subs will downfire, port will be out the end with 3 - 4" of space before the rear door.
the sketched line shows the path of the air through the port to the outside
My worry is that the space I have is a really bad shape for the position of the subs with reference to the top of the box and the distance between the subs and the port.
Is the end opening for the port a bad place to put it? right now it gets me the right port area and maximises the length I can get.
Thoughts?
