I got started hooking things up today and im using a single volfenhag 1800(max)amp. I am using a redtop that is mounted in my trunk. The shda2 fused dist. has two outputs but i am only using the one because i just have one amp. Its brand new and i checked the fuses but it wont quit fukking buzzing at me(indicates 1.blown fuse or 2.all fuse positions are not occupied) I hope i dont need to use both outputs. also i have some LED rcas that im using so they have a 3rd wire on each end used to connect with your turn on wire(serves as neg grnd). has anyone else had some experience with these products? I got all this (except my amp and subs) from millionbuy on
ebay which i got a pretty good deal on it all except i was shorted some of my 4ga wire,just enough so i have to get another few feet of it). //content.invisioncic.com/y282845/emoticons/pissed.gif.9f665f96bc89e98e708dabd4580bb591.gif The one thing they didnt have was the amp turn on wire i was wondering if i could use any 16ga wire?(i have a lot lying around). Also, any recommendations for connecting the 3rd wire on my rcas with my turn on wire? thanks
