Tons of amps!!! plus links Rockford Fosgate

Status
Not open for further replies.

kramer_212
10+ year member

CarAudio.com Veteran
4,643
0
Minnesota
Item(s) for Sale:

REALLY REALLY DON'T WANT TO SELL ANY OF THESE, BUT MY CAR LITERALLY BLEW UP AND HAD TO BUY A NEW CAR AND GETTING MARRIED, SO WILL HAVE TO MAKE SOME SACRIFICES, ALSO HAVE OTHER O/S GEAR IN OTHER LISTINGS.

Rockford fosgate

4040 dsm

4080 dsm

40 dsm

60ix

500m

150A2

TYPE RF X1

DSM LINKS SAME PAINT AS 4080

Item(s) Description/Condition:

4040 dsm -mint with original box

4080 dsm this and both the links seem to have been repainted (but repainted very well)

40 dsm - mint

60ix- 9/10 few small nicks

500m 9/10 few small nicks these are conservative ratings and all work 100%

150A2 9/10 one minor blemish

TYPE RF X1 near mint

Price:

4040 dsm - $ $125 shipped on my o-scope at 14.3 v 73watts rms per channel into 4 ohms

4080 dsm - $ $150 shipped 14.2v 122 watts rms per channel into 4 ohms

40 dsm - $ 80 shipped 14.3v 63watts rms per channel into 4 ohms

60ix - $ 100 shipped 14.2v 81 watts rms per channel into 4 ohms

500m - $ 250 shipped not sure but i have seen birth sheets with this over 700watts rms at 12.8v

150A2 - $ 100 shipped 14.2v 77 watts rms per channel into 4 ohms

TYPE RF X1 - $ 150 shipped does over 240 watts rms per channel into 2 ohm,,,,, seen these clamped around 900 wats rms bridged.

LINKS $65 SHIPPED EACH

Shipping and Miscellaneous Item Information:

FREE

2012-01-30_19-23-10_858.jpg
[/img]

2012-01-30_19-23-24_10.jpg
[/img]

2012-01-30_19-35-00_281.jpg
[/img]

2012-01-30_19-36-16_688.jpg
[/img]

2012-01-30_19-30-48_190.jpg
[/img]

2012-01-30_19-31-01_270.jpg
[/img]

2012-01-30_19-34-30_102.jpg
[/img]

2012-01-30_19-34-38_24.jpg
[/img]

 
yes nice os collection, too bad your car blew up. Thats what happens when best buy installs your wiring. j/k //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif. Local pawn shop had some of the first power 12's a while back but they were pretty beat up. woulda bought em if they were in good shape they only had the pair at $150 with a box.

 
On the 4080 I'm assuming it's stable at 2 in each channel? Any idea what it does on those at 2 ohm? Just curious if you know.
they are 2 ohm stable some run them at 1, i only tested at 4 ohm because thats what i was going to run them at.

 

---------- Post added at 12:25 PM ---------- Previous post was at 12:24 PM ----------

 

Great guy to deal with here I sold to him a few times. Good luck man. Wish I could take some of this stuff off your hands
thanks, if anybody is worried just check my feedback.

 
Yea my pops would go crazy if he seen this collection! GLWS's. That X1 is sexxy!
I love the dsm display, and functions, i played with it for an hour the day i got it.

 

---------- Post added at 12:28 PM ---------- Previous post was at 12:27 PM ----------

 

yes nice os collection, too bad your car blew up. Thats what happens when best buy installs your wiring. j/k //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif. Local pawn shop had some of the first power 12's a while back but they were pretty beat up. woulda bought em if they were in good shape they only had the pair at $150 with a box.
buy some amps!!!

 

---------- Post added at 12:28 PM ---------- Previous post was at 12:28 PM ----------

 

Super sick collection, if i didnt have a zed lined up ide be all over that 4080. GLWS
don't let the 4040 be under sold, i ran my t2 comps on if for a week or two, and never had a complaint power, or sq wise.

 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

Similar threads

Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
348
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
615
You don't need two amps. The speakers come with crossovers to help protect the tweeters.
14
908
Perhaps you changed something without mentioning it here? Maybe a loose turn on line? I dunno man...but we'll take it. Hopefully it keeps working. 👍
16
1K
No doubt, was just thinking of that when i was mulling getting one of these. https://blackbrickaudio.com/products/100-watt-4-channel-amplifier
2
1K

About this thread

kramer_212

10+ year member
CarAudio.com Veteran
Thread starter
kramer_212
Joined
Location
Minnesota
Start date
Participants
Who Replied
Replies
51
Views
5,813
Last reply date
Last reply from
kramer_212
IMG_1154.png

GoldCountryCA

    May 5, 2024
  • 0
  • 0
IMG_1153.png

GoldCountryCA

    May 5, 2024
  • 0
  • 0

Latest topics

Top