To all you BAGGED vehicle owners

[SethPhillips 5,000+ posts]

im gunna weld on the 4 link.. then see where my axle hits the frame.. then notch it. build a bridge, and mock up my shock mount's and bagg mounts and then start on the front.... then buy my tank, compressor. valves ex....

 

[JLJunkieMX107 10+ year member]

Thats cool man. I was under the assumption it was your DD so go ahead and cut her up lol. Also, IMO, bag over axle is a ton better than any other setup.

 

[snoopdan 5,000+ posts]

snoopadan... was cruisefest in KY this year???

no it was back in indiana. I didnt go, I was half way thru my wall build at the time, and the funkmaster flex show from a few months before gave me a bad taste in my mouth.

ive got a new set of CCE hydraulics, the chrome dual dump & braided lines setup that I never put on my jeep //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif I should put it on my vette //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 

[SethPhillips 5,000+ posts]

Thats cool man. I was under the assumption it was your DD so go ahead and cut her up lol. Also, IMO, bag over axle is a ton better than any other setup.

yea i have a DD, my truck just sit's in the shop and about 3 month's ago i was like **** it.. im gunna bagg that bad boy. so i started takein it apart..

i plan on doing my bags over my axle... i got pics on my myspace page....

 

[SethPhillips 5,000+ posts]

no it was back in indiana. I didnt go, I was half way thru my wall build at the time, and the funkmaster flex show from a few months before gave me a bad taste in my mouth.
ive got a new set of CCE hydraulics, the chrome dual dump & braided lines setup that I never put on my jeep //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif I should put it on my vette :up2somth:

we went to cruisefest 2 years ago??? when it was in louisville... we had a budget box truck with 20ft beer boings and a full dj set up with pa speakers..... it was a riot!!!!!

 

[snoopdan 5,000+ posts]

here are my ghey little baggies //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif But eh, they're for weight more than anything else....walls **** sometimes //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[SethPhillips 5,000+ posts]

here are my ghey little baggies //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif But eh, they're for weight more than anything else....walls **** sometimes //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

it's better then saggin,

 

[60ndown 10+ year member]

only way id do it,

http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=bagged+truck&category0=

 

[snoopdan 5,000+ posts]

it's better then saggin,

true dat //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

ive got dump valves on it, but I dont even have it hooked up....I added it to it and then sat back and thought "wtf did you do that for" //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[86yota 10+ year member]

tc300 do you happen to own the orange grandam with 4 TC 15s in a wall?

 

[NeverEnuffBass 10+ year member]

here are my ghey little baggies //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif But eh, they're for weight more than anything else....walls **** sometimes //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I need those for my Durango badly, gained 3inches in the rear wheel well when I pulled out the wall //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[woody89 10+ year member]

I'm bagging a Jetta as we speak, so far the air management stuff and rear end is costing me around $600. And I will still need to buy the stuff for the front, plus a 2nd compressor, more valves, fittings, etc.. for a FBSS setup.

One thing about it though, you don't want to go cheap. Stick with Suicidedoors.com they make quality stuff.

 

[SethPhillips 5,000+ posts]

I'm bagging a Jetta as we speak, so far the air management stuff and rear end is costing me around $600. And I will still need to buy the stuff for the front, plus a 2nd compressor, more valves, fittings, etc.. for a FBSS setup.
One thing about it though, you don't want to go cheap. Stick with Suicidedoors.com they make quality stuff.

yes... i had cheep lower dropp control arms. and they had snapped about a year ago.... so im gunna buy new upper and lower control arms from thorbeck... and drop spindles

 

[JLJunkieMX107 10+ year member]

I'm bagging a Jetta as we speak, so far the air management stuff and rear end is costing me around $600. And I will still need to buy the stuff for the front, plus a 2nd compressor, more valves, fittings, etc.. for a FBSS setup.
One thing about it though, you don't want to go cheap. Stick with Suicidedoors.com they make quality stuff.

You have to get 2 tanks for a jetta? We only use 8 gallon tanks for a our trucks and have more than enough air. Im assuming it is strut bagged which is quite a bit cheaper than bagging a truck.

 

[woody89 10+ year member]

You have to get 2 tanks for a jetta? We only use 8 gallon tanks for a our trucks and have more than enough air. Im assuming it is strut bagged which is quite a bit cheaper than bagging a truck.

I'm only doing the rear for now, jsut got a 5 gallon tank at the moment. Once I do the front I'll probably just swap it out for a 7 or 8 gallon one rather than buy another. Trucks are cheaper to just purchase the bags and cups, but then come 4 links and whatnot, struts range anywhere from $400-900, as far as I've seen. Rear on my car is just cups and brackets, no struts.