Those with P880PRS or P800PRS

[XxSuperAdamxX 10+ year member]

Page 61, bottle left hand corner. Might be only a option while in network mode though


I just keep spinning it. Works for me.

Maybe my HU is on STD mode instead of NW? I'ma go check.

 

[XxSuperAdamxX 10+ year member]

which one do you guys use? Standard or Network?

 

[ToxicBanana 10+ year member]

STD is Front//Rear/Sub

NW is Tweet/Mids/Sub

I am going to use STD until I buy another amp, then it will be NW

 

[XxSuperAdamxX 10+ year member]

Thanks buddies, I finally found out how to mute, I was looking at the STD instructions before but I guess I had to look at the NW.

 

[nismos14 5,000+ posts]

Whoa whoa whoa, are you running active? You can't just pick and choose which one you want to run.

 

[XxSuperAdamxX 10+ year member]

Nope, I'm not running active.

 

[nismos14 5,000+ posts]

Then you should be in standard mode.

 

[XxSuperAdamxX 10+ year member]

I have to take out my whole HU and check on the side of the HU to see if it's STD or NW right>

 

[nismos14 5,000+ posts]

Yup.

 

[ebrunn 10+ year member]

I have to take out my whole HU and check on the side of the HU to see if it's STD or NW right>

Dont even need to do it because Im 100% sure its still on STD.

 

[XxSuperAdamxX 10+ year member]

Hmmm all right.

 

[iamamp3pimp 5,000+ posts]

muting channels is in the manual....

 

[XxSuperAdamxX 10+ year member]

So, any of you guys are going active on your speakers right now?

 

[nismos14 5,000+ posts]

I am with my 9887.

 

[XxSuperAdamxX 10+ year member]

I am with my 9887.

Just wondering...is the 9887 the deck where you can touch it and slide?