The camera opens in first gear

  • 3
    Participant count
  • Participant list

aleksandar095

CarAudio.com Newbie
3
0
Serbia
I have problem with multimedia 7010b. I don't have a camera and when I put in first gear and start driving, the blue screen of the camera opens and closes when I drive faster than 20km / h.

This also happens when I put it in reverse and start driving backward. I think it should opens camera when I put in reverse... not after start driving.

I have checked settings and there is no option to disable camera?

How can I fix this?
 

Attachments

  • IMG_20210404_175528.jpg
    IMG_20210404_175528.jpg
    625.2 KB · Views: 57
  • IMG_20210404_175539.jpg
    IMG_20210404_175539.jpg
    550.3 KB · Views: 58
  • IMG_20210404_175610.jpg
    IMG_20210404_175610.jpg
    629.3 KB · Views: 62
Looks like a typical Chinese head unit. And most likely unless you can modify the firmware then no. Should be a wire hooked up that powers that up though possibly in the back look at the head units wiring chart it should say it possibly.
 
Looks like a typical Chinese head unit. And most likely unless you can modify the firmware then no. Should be a wire hooked up that powers that up though possibly in the back look at the head units wiring chart it should say it possibly.

I have checked cables and there is 7 wires. One is missing. I have checked manual and I can see that there is no pink wire... that is for reverse camera. Is there any solution how to update firmware, or just unlock developer tools?
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Hi, I installed a new Kenwood dnr476s head unit along with idatalink maestro Rr, the HRNI1, the HU-Ken1, and the nav1 adapter. It works well...
0
198
It only works when the car is in reverse. Also, some units have trigger options in the settings menu.
3
440
Try to reset again and if that doesn't work, try updating the firmware. To update the firmware for Alpine X800D, you can follow the instructions...
1
836
How positive are you that the reverse camera power supply was spliced in with a reverse light wire? If you used one of those blue wire splicers...
1
708
That looks like it can work for backup cam for sure, thanks
2
895

About this thread

aleksandar095

CarAudio.com Newbie
Thread starter
aleksandar095
Joined
Location
Serbia
Start date
Participants
Who Replied
Replies
4
Views
941
Last reply date
Last reply from
aleksandar095
IMG_1052.jpeg

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0
IMG_1046.png

GoldCountryCA

    Apr 26, 2024
  • 0
  • 0

Latest topics

Top