Backup camera

[Mr FaceCaser]

I'm not sure if I have the red wire that's connected to the video input connected to the right wire on the harness can someone tell me where to put the red wire from the video input on the camera to on the harness like witch one is going to be the trigger wire to power on the camera on this harness I circled the 2 only options o believe

Click to read more...

 

[1aespinoza Premium Member]

witch one is going to be the trigger wire to power on the camera on this harness I circled the 2 only options o believe

The Reverse +. The wire that comes from the camera goes into that wire. The camera itself will get power from one of the + reverse bulb wiring.

 

[Mr FaceCaser]

The Reverse +. The wire that comes from the camera goes into that wire. The camera itself will get power from one of the + reverse bulb wiring.

It didn't work but when I hooked it the the ignition 12v+ it worked

 

[1aespinoza Premium Member]

It didn't work but when I hooked it the the ignition 12v+ it worked

It only works when the car is in reverse. Also, some units have trigger options in the settings menu.