Test my enclosure making abilities.

[DRMVP21 10+ year member]

38w x 14Hx20d. Sub displacement is .09cu.ft. 2 pioneer ts-w3004spl. 3.5 cu. ft after displacement tuned to 32hz.

 

[bluelceii 10+ year member]

15" FI Q

32W x 14 H x 26D

tuned to 32Hz

2.8 - 4 cubes (as much as you can get...)

Just whatever you can get that's best.

oh and sub up and port back (kinda obvious......)

I'll be using the XX-Zeus

 

[shalizi 10+ year member]

i need it for 2 12 FI BL bandpass box..max dimmensions are 37 wide x 15 high x 20 deep can be expanded to 24 if needed.. i want a flat response from 28 hz to 80 hz with minimal peaks. Sub Displacement: 0.15cuft port size 60 sq inches but can go to 120 but rather not due to lack of power

 

[Pyro_By_Nature 5,000+ posts]

Make the circle, use the push/pull tool to push it in, the thickness of your wood. 3/4", 1 1/2", whatever.

 

[slikrider20 10+ year member]

Make the circle, use the push/pull tool to push it in, the thickness of your wood. 3/4", 1 1/2", whatever.

I know how to make a circle. It worked fine on the side. It's just when i make it on the top, it makes all the colors look really weird. I dont know if yall know what im talking about exactly.

 

[kicker06 10+ year member]

Pull the circle up, then use the eraser to delete the lines of the circle.

 

[kicker06 10+ year member]

Let me start over, since I realize all these free enclosure calculators are WAY off.

I will be running a 15" Fi Q on a 1200wrms in my trunk car, with sub facing UP and Port Backwards. I want 4.0 cubic feet after port and sub disp, tuned to 32hz w/ 65sq" of port.

I want the box to be 30" long and 14" high, my max width is 30" though.

Here is what I came up with so far, but I cannot figure out the second port length for the correct tuning.

External Dims: 24"w x 30"d x 14"h

 

Internal Dims (using .75" wood) : 22.5w x 28.5d x 12.5h

 

Internal Volume includ. port disp = 4.638

 

Port 1 = 5.25" w x 12.5" h x 24" d

 

Port 1 disp = 0.9 cu ft

 

Port 2 = 5.25" w x 12.5" x ?

And that is where I got stuck.

I need the depth and height to be the same, but the width can be changed around.

If you could help, that would be awesome!

Thanks man!

 

[PV Audio 5,000+ posts]

How are you designing these boxes? As in, what are you using?

 

[kicker06 10+ year member]

If your talking to him, then SketchUp

And me, I am using a calculator.

 

[IonSQL 10+ year member]

Sketchup is NOT a design tool, it is a visual aid only.

 

[PV Audio 5,000+ posts]

delete.

 

[PV Audio 5,000+ posts]

If your talking to him, then SketchUp
And me, I am using a calculator.

I was talking to him, and he can't be using sketchup to design boxes as it has nothing whatsoever to do with audio.

 

[kicker06 10+ year member]

I thought you meant as in drawing the boxes.

But, I would like to know too.

 

[slikrider20 10+ year member]

A excel file. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[slikrider20 10+ year member]

And no, obviously you can't find the port length using sketchup. But once you find the port length 99% of the rest of it sketchup can handle. Cut out sheet, actual port length on the 3d model, area of the box etc..

Actually the box i made you should work out perfect, it's less than 30inches wide, and has your requested tuning/port area.

It's actually 3.81cf net after port and sub displacement. I forgot to add in the sub displacement to the box. As you can see here, the internal volume minus the port is exactly 4.01cf.