Sold Team Maf's system sale(Fi, batteries, 1/0 etc.)

Team MAF
10+ year member

Senior VIP Member
Rating: 0%
0 0 0
276
0
IN
Well finally decided just because of the money factor to maintain such a system is just becoming out of my league and out of my interest(mainly since im not about to drive miles upon miles to be in competitions) So im cutting in down a bit, here's whats up for grabs

FS only.

Btls are old models, with triple slug motors...all options, daily, universal .

(BTLs will be shipped in original crate packaging as they came from FI, as i believe i still have both of them in my possession)

-1x Fi btl 12" old style cone/dustcap/leads, sub was ran around 1800w with a hifonics amp back in the day then never saw over 1500w later via my ia20.1. looking for around $305 shipped

DSC01307.jpg


-1x Fi Btl 12" Newer dustcap, ribbon leads, sub has never seriously been broken in...aint seen above 1500w tops. Had a drill slip incident and popped a small hole in the dustcap, slapped electrical tape over it, also there's a scuff in the foam from rubbage(rubbed something inside trunk see pic) Never gave me any trouble, if its a issue to you re-cones can be bought direct from FI. $330 shipped

DSC01319.jpg


DSC01331.jpg


-Hc2400 kinetik battery, few years old, blue casing..still works good and holds a nice charge(throwing in 1 post all i have, if you need posts instead of bolts send a request to kinetik and theyll send you a pair of battery posts free). $175 shipped

DSC01299.jpg


-Deka 9a31 battery, barely a year old, bought last summer(almost comparable to hc2400).... $145 shipped

DSC01301.jpg


-1/0 KnuKonceptz Kollosus flex wire

8ft brand new black 1/0 = $30 shipped

DSC01295.jpg


-1/0 audio pipe black 1/0 30" slice and basic(generic) red 1/0 strip 32" slice... offer $$$

DSC01305.jpg


-1/0 wielding wire, BARELY FLEXES/STIFF "BEWARE", 2 11" cuts and 1 7" piece. Offer $$$$

DSC01303.jpg


-Knuconceptz 1/0 and 4 gauge input battery post terminals $30 shipped for pair. Each have 2 holes, 1 for 1/0 and 1 for 4/5 gauge.

DSC01296.jpg


-Willing to ship this heavy *** stuff but shipping costs will be a bit extra if you live along the west coast or really far away for example as say sending a 60lb battery from Indiana to California will probably cost $50~ alone via UPS. Same with the subs as they are beasters~ In other words, the prices will stand as long as you do not live too far away from me.

PM me up.

REFS: Havent been keeping a record, since i really do not buy/sell much on here, but the few that I have in the forums.

keifersracing on SMD = sold term lab to

icpurplalot= bought btl

 
up...Hc2400 , BTLS, wire and terminals still available.

HC2400 is available via pickup only

I will not ship batteries anymore As i had a ordeal just recently with UPS damaging the DEKA via dropping(yea great service ahey PACK AND SHIP PROMISE my ****ing ***)

 
just outa curiosity how much for a the batts if i picked up

edit; nm; is the shipped price the same as the pick up price; which would be quite strange
The Kinetik hc2400 is only left.

Pickup price would be $150 if you wish to pickup. The upkeep of the shipping price includes mainly supplies to package the battery properly as a ordinary box will not handle the 60+lbs of weight.

 
Bump

Btl's still available.

Kinetik freshly charged..Still maintaining proper voltage.

This shit needs to go before the depression hits... hit me up lol //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Team MAF

10+ year member
Senior VIP Member
Thread starter
Team MAF
Joined
Location
IN
Start date
Participants
Who Replied
Replies
39
Views
3,607
Last reply date
Last reply from
Team MAF
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top