Sold Team Maf's system sale(Fi, batteries, 1/0 etc.)

Team MAF
10+ year member

Senior VIP Member
Rating: 0%
0 0 0
276
0
IN
Well finally decided just because of the money factor to maintain such a system is just becoming out of my league and out of my interest(mainly since im not about to drive miles upon miles to be in competitions) So im cutting in down a bit, here's whats up for grabs

FS only.

Btls are old models, with triple slug motors...all options, daily, universal .

(BTLs will be shipped in original crate packaging as they came from FI, as i believe i still have both of them in my possession)

-1x Fi btl 12" old style cone/dustcap/leads, sub was ran around 1800w with a hifonics amp back in the day then never saw over 1500w later via my ia20.1. looking for around $305 shipped

DSC01307.jpg


-1x Fi Btl 12" Newer dustcap, ribbon leads, sub has never seriously been broken in...aint seen above 1500w tops. Had a drill slip incident and popped a small hole in the dustcap, slapped electrical tape over it, also there's a scuff in the foam from rubbage(rubbed something inside trunk see pic) Never gave me any trouble, if its a issue to you re-cones can be bought direct from FI. $330 shipped

DSC01319.jpg


DSC01331.jpg


-Hc2400 kinetik battery, few years old, blue casing..still works good and holds a nice charge(throwing in 1 post all i have, if you need posts instead of bolts send a request to kinetik and theyll send you a pair of battery posts free). $175 shipped

DSC01299.jpg


-Deka 9a31 battery, barely a year old, bought last summer(almost comparable to hc2400).... $145 shipped

DSC01301.jpg


-1/0 KnuKonceptz Kollosus flex wire

8ft brand new black 1/0 = $30 shipped

DSC01295.jpg


-1/0 audio pipe black 1/0 30" slice and basic(generic) red 1/0 strip 32" slice... offer $$$

DSC01305.jpg


-1/0 wielding wire, BARELY FLEXES/STIFF "BEWARE", 2 11" cuts and 1 7" piece. Offer $$$$

DSC01303.jpg


-Knuconceptz 1/0 and 4 gauge input battery post terminals $30 shipped for pair. Each have 2 holes, 1 for 1/0 and 1 for 4/5 gauge.

DSC01296.jpg


-Willing to ship this heavy *** stuff but shipping costs will be a bit extra if you live along the west coast or really far away for example as say sending a 60lb battery from Indiana to California will probably cost $50~ alone via UPS. Same with the subs as they are beasters~ In other words, the prices will stand as long as you do not live too far away from me.

PM me up.

REFS: Havent been keeping a record, since i really do not buy/sell much on here, but the few that I have in the forums.

keifersracing on SMD = sold term lab to

icpurplalot= bought btl

 
Im located near South Bend, Indiana.

Dont know how long any of this will last, Subs and batts are just chillin in my trunk, taking them out later today for pics.

 
List is being slowly updated with prices/specs.

Going to clean out the trunk now...expect updates later.

EDIT: pics

 
do you have any more 1/0 wire?

I will be in Indiana next week..

How much for the 2400 picked up? You literally gave me a heart attack since I was looking for HC2400 few weeks ago, I gave up and brought one brand new from ebay for 300 shipped and now here is your battery for an insane price.. oh great.. lol

 
do you have any more 1/0 wire?
I will be in Indiana next week..

How much for the 2400 picked up? You literally gave me a heart attack since I was looking for HC2400 few weeks ago, I gave up and brought one brand new from ebay for 300 shipped and now here is your battery for an insane price.. oh great.. lol
Nope, Im keeping the rest for my new application just to make sure I have enough when the times come.

Not really too insane of a price, On ebay they should be around $220-40 shipped new(or use to anyways), but peeps gouge on the price like a sob. Store by me wanted like $140 for a hc800 LMAO...fricking joke.

And where at in Indiana are you heading?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Team MAF

10+ year member
Senior VIP Member
Thread starter
Team MAF
Joined
Location
IN
Start date
Participants
Who Replied
Replies
39
Views
3,606
Last reply date
Last reply from
Team MAF
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top