TC's 100$ sub?

[DeuceLee 10+ year member]

What they recommend is best. i would give them more on the 1kw personally..

yeah, i'd be giving them 500 rms a piece...so if i got 4, 2K would be nice...

 

[dalucifer 10+ year member]

What amps at 100 watt @ 4 ohm..I cnat find any...

You could actually wire them to 2 ohms since they are single 4 ohm drivers. Send me a PM and I can help u out.

 

[JAL232 10+ year member]

Can you wire them for 2 ohms??? Need to know so i can get an amp now...if so how do you wire from 2 to 4 ohms

 

[dalucifer 10+ year member]

Can you wire them for 2 ohms??? Need to know so i can get an amp now...if so how do you wire from 2 to 4 ohms

re-read post number 17

 

[JAL232 10+ year member]

Sorry bout that..youve got mail

 

[ngsm13 5,000+ posts]

Large Box (Low Extention)
10dB-500

Type Volume Tuning Fq Area Port/Pass Length / Mass

Sealed 1.3ft3 NA NA NA

Ported 2.7ft3 21Hz 12.5in2 20in

Passive 2.7ft3 21Hz Two 12" PR's 550g

wow thats a huge box for a single 10"

TC uses LEAP and always models for PERFECTLY flat response. Also, I don't think they take cabin gain into account.

nG

 

[JAL232 10+ year member]

Does anyone have a cutout or measurements ofr a box that is 1.3ft cubed? Or no where to get one?

 

[ngsm13 5,000+ posts]

Does anyone have a cutout or measurements ofr a box that is 1.3ft cubed? Or no where to get one?

There is an endless amount of possibilities for a 1.3cubes box...

What dimension do you have to work with in your vehicle?

nG

 

[JAL232 10+ year member]

Its a Grand Prix so i have plenty of room...Okay heres the questions: is that 1.3 cubes per encloser or total with both...and if the cutout on those db500 is 9.25" I cant find anyhting to match that just 9/1/8" So im kidna stuck here

 

[dalucifer 10+ year member]

Its a Grand Prix so i have plenty of room...Okay heres the questions: is that 1.3 cubes per encloser or total with both...and if the cutout on those db500 is 9.25" I cant find anyhting to match that just 9/1/8" So im kidna stuck here

1.3 per sub...as far as the enclosure it should be ok, just a bit snug or u can cut out another 1/4 of an inch

 

[Raven 10+ year member]

Its a Grand Prix so i have plenty of room...Okay heres the questions: is that 1.3 cubes per encloser or total with both...and if the cutout on those db500 is 9.25" I cant find anyhting to match that just 9/1/8" So im kidna stuck here

Draw out the circle for the cutout, drill a big hole on one end, and use a jigsaw to cut it out. You do not want to get into the habit of "shaving" off parts of the cutout to make the woofer fit. It can make the hole out of round which can lead to a whole world of problems.

 

[JAL232 10+ year member]

Ok sweet..Ill order tomorro I think...Now for the wiring...Im thinkin what 4 guage from battery back...then 8 guage to subs...Im goin withe the Kenwood excelon 890

 

[sqhertz 5,000+ posts]

holly focking chit.

this thread blew the **** up //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif i guess i started the new forum boner. no one has seen that yet? i just happened to decide to check up on em and seen that. it does look tempting.

i want to see reviews from those who are buying them. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[lookitsjim23 10+ year member]

i think im probbaly gonna pick up 4 of them...probably for christmas if the review is good on these

 

[sqhertz 5,000+ posts]

after reading all the positive comments people made about TC in general , im almost sure it wont be a bad sub. id like to see a comparison between that and the assassin.