tach wire, neutral safety switch?

[gl0ck 10+ year member]

Nio Relay needed as long as its not a high current ground.

 

[THUNDERBIRD 10+ year member]

sweet you got it working.

 

[pontiac_rayzer 10+ year member]

ok seems like this alarm wasn't meant for me, i keep having problems with it how do i make it trigger when the inside lights are turned by someone pushing on the buttons on the outside of the door drivers side???

 

[mokedaddy 5,000+ posts]

You have to hook the door trigger up to the dome light.

 

[pontiac_rayzer 10+ year member]

You have to hook the door trigger up to the dome light.

so i have to connect the "door trigger" to the domelight too?? what about domelight supervision wire? isn't suppose to do that? man i'm confused:crazy:

 

[mokedaddy 5,000+ posts]

The dome supervision wire turns the dome light on when you disarm the alarm. If you want the alarm to go off when the dome light turns on you must connect the door trigger to the dome light wire

 

[pontiac_rayzer 10+ year member]

The dome supervision wire turns the dome light on when you disarm the alarm. If you want the alarm to go off when the dome light turns on you must connect the door trigger to the dome light wire

never mind then i don't want the remote to tell me someone opened a door when really it was just someone playing with the buttons, or what do you think?

one last question alarm won't arm by itself it only activates when i use the remote

that's not a problem with me but how can i make it arm by itself

 

[gl0ck 10+ year member]

In the Dei Manual i think second menu, look for passive-Active Arm, Change that setting and your good to go.

I hate this setting.

 

[pontiac_rayzer 10+ year member]

hey back again with some questions....

first my seatbelt alert stopped working, it turns on and then it turns off for a minute or two and then turns back on and stays on for the rest of the drive.....

can anyone tell me what might be causing this.

oh i wanted to add a window roll up module to the alarm but i decided to do that with relays instead do you think that this is a good idea?

 

[gl0ck 10+ year member]

i would use the module because it learns resistance going down and up so you will not burn up your motor, for the 20-40 dollars i would def do that. I Have no clue maybe a popped fuse or a Door trigger issue

 

[mokedaddy 5,000+ posts]

Yeah definitely dont use relays. While it is possible it isnt even worth it.

And about your seatbelt it sounds like either a fuse or a harness came unplugged somewhere.

 

[pontiac_rayzer 10+ year member]

i would use the module because it learns resistance going down and up so you will not burn up your motor, for the 20-40 dollars i would def do that. I Have no clue maybe a popped fuse or a Door trigger issue

yeah i know i can spend the 50 to 100 dollars thats the price around here for 4 window modules going up and down.. oh and about the seatbelt problem, do you think it could be the door trigger wire i'm using? i'm thinking it might be it. but i don't know.

 

[gl0ck 10+ year member]

I doubt it what wire are you using, if i remember correctly Their will be a harness under the seat and make sure its not unhooked or wet, trigger wise it only monitors that wire so it should not affect the wires performance.

 

[pontiac_rayzer 10+ year member]

I doubt it what wire are you using, if i remember correctly Their will be a harness under the seat and make sure its not unhooked or wet, trigger wise it only monitors that wire so it should not affect the wires performance.

yeah it could be the harness under the seat, i'm going to check that out first....

i'll let you know how it goes.........