System tuning with REW and UMIK-1

  • 2
    Participant count
  • Participant list

K9_Candyman

CarAudio.com Recruit
34
5
Germany
Hello again dear caraudio friends. I need a little help now that my system is finally done, tuning it the right way.
My weapons are a Umik-1 microphone, and suggested by a lot of people the REW software, but i never tuned a car, so please help. I play open door, and in the front i have 8 10pr310 and 4 hf108 drivers from faital pro, and in the rear 2 Pride sv3 15's. All the gain are on point using a -3db test tone, but now i need to level the signal, the phase, delay and equalization from the dsp but i don't know what to do. Someone can give me a quick tutorial step by step on how to tune a system please?
 
Activity
No one is currently typing a reply...

Similar threads

I may have missed it, but do you have sound deadener on the doors? If not that could be why you're lacking midbass.
3
823
gain setting info.... the test tones are at the very bottom https://jlaudio.zendesk.com/hc/en-us/articles/204374120-Amplifier-Level-Setting-Guide
3
1K
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
195
Sweet!! Im happy to hear that it was not a major issue.!! Very nice man. Thanks for letting us know what the culprit was!!
19
643

About this thread

K9_Candyman

CarAudio.com Recruit
Thread starter
K9_Candyman
Joined
Location
Germany
Start date
Participants
Who Replied
Replies
1
Views
2,311
Last reply date
Last reply from
YourNameHere
Image 5-2-24 at 8.16 PM (1).jpeg

slater

    May 2, 2024
  • 0
  • 0
Image 5-2-24 at 8.16 PM.jpeg

slater

    May 2, 2024
  • 0
  • 0

Latest topics

Top