Subzero's Soundstream Cavalier rebuild

[dave_damage 10+ year member]

Di VInci 12 would look sexy

If you can find one that was actually magnetized.. lol ever wonder why they went from $750 down to $135 back in the day? because unauthorized dealers got stuck with the products lol!!! I believe with all the Davinci subs out there only one out of every 4 ( 25%) were actually magnetized..

 

[Hegotgame 10+ year member]

Looking good.

 

[subzero 5,000+ posts]

how many cubes is the box?

I dont know how to calculate a folded transmissionline box. I had the spec drawn up by a guy on DIYMA. I want to guess, 1.5 before it starts into the folded line. Folded line looks to be 2 cubes cut in angled halves. empties out at a 2.5 inch opening.

 

[subzero 5,000+ posts]

If you can find one that was actually magnetized.. lol ever wonder why they went from $750 down to $135 back in the day? because unauthorized dealers got stuck with the products lol!!! I believe with all the Davinci subs out there only one out of every 4 ( 25%) were actually magnetized..

ok, so nobody knows how well these perform when magnitized? I wonder how hard it would be to have one magnitized if I where to find one?

 

[subzero 5,000+ posts]

Looking good.

Thank you kind Sir. Thats sum nice equipment your sportin...

 

[subzero 5,000+ posts]

final tweeter resting places. Up hight to lift the image up

These are adjustable axis tweets. This combination with the fine tunning = amazing sq

I am taking kitties to new home.

This is a sketch of the box I want to experiment with.

 

[subzero 5,000+ posts]

Oh yea, I put the LOUD... back in

I will be looking at the SPLX or Refference subs to replace these. Or sum subs that total 2ohms together with a rms handle of 2000rms combined

 

[subzero 5,000+ posts]

X3 comming soon...

 

[Brian_smith06 10+ year member]

try doing something like this with your pillars. this is what I have found works best with my car

 

[subzero 5,000+ posts]

I just might. Especially now since I lost the sails somewhere I have to scorer the junk yard in search of parts now

 

[1EdgeKilla 10+ year member]

subzero... i am currently working on an install in my 2002 cavalier... after looking over your cavi build i figured you would know... but anyhow, without building pods like you did, could i fit a 6.5 where the stock 4X6's were and if so how much depth do i have to work with... its so hard to tell and i havent taken my panels off to measure for myself yet.

 

[subzero 5,000+ posts]

subzero... i am currently working on an install in my 2002 cavalier... after looking over your cavi build i figured you would know... but anyhow, without building pods like you did, could i fit a 6.5 where the stock 4X6's were and if so how much depth do i have to work with... its so hard to tell and i havent taken my panels off to measure for myself yet.

I believe it was 1 and 1/4 inches from the panel to the sheetmetal. Then after the sheetmetal you have 3/4 inches till you interfe with the window.