I just recently got a Kenwood KAC-7204 w/ the following specs: http://ae.kenwood.com/Car_Entertainment/Power_Amplifiers/KAC-7204
I am looking to do a SQ setup in a sealed box according to optimal size with the following subs.
I need input as to what the best setup with this amp is:
2-10" MB Quart RWE-252
Peak Power Handling: 600 watts
RMS Power Handling: 300 watts
Frequency Response: 22 300 Hz
Subwoofer Size: 10"
Impedance: dual 2 ohms
Possible Impedance Variations: 1, 2 or 4 ohms
Recommended Box: 0.65 cu. ft. sealed
Sensitivity: 2,4dB
Mounting Depth: 5.2"
or
1- 12" MB Quart PWH 304
12" Dual 4 ohms Premium Series Subwoofer
Power Handling:
Peak: 1000 watts
RMS: 500 watts
Impedance: Dual 4 ohms
Injection polypropylene filled, honey cone structured body with WPC titanium wet powder coating
1" Wide rubber surround
"Wrap Around" die-cast aluminum basket and motor structure with diamond-cut machined sides
Finite element analysis linear flux saturated magnetic plates with chrome finish
Single flat Conex spider with woven tinsel leads
Polypropylene dust cap with hot-stamped MB Quart logo
3" Voice coil on glass fiber former with aluminum reinforcement on neck
120oz. Double stacked ferrite magnet
Frequency response: 32-380 Hz
Sensitivity: 85 dB
I am looking to do a SQ setup in a sealed box according to optimal size with the following subs.
I need input as to what the best setup with this amp is:
2-10" MB Quart RWE-252
Peak Power Handling: 600 watts
RMS Power Handling: 300 watts
Frequency Response: 22 300 Hz
Subwoofer Size: 10"
Impedance: dual 2 ohms
Possible Impedance Variations: 1, 2 or 4 ohms
Recommended Box: 0.65 cu. ft. sealed
Sensitivity: 2,4dB
Mounting Depth: 5.2"
or
1- 12" MB Quart PWH 304
12" Dual 4 ohms Premium Series Subwoofer
Power Handling:
Peak: 1000 watts
RMS: 500 watts
Impedance: Dual 4 ohms
Injection polypropylene filled, honey cone structured body with WPC titanium wet powder coating
1" Wide rubber surround
"Wrap Around" die-cast aluminum basket and motor structure with diamond-cut machined sides
Finite element analysis linear flux saturated magnetic plates with chrome finish
Single flat Conex spider with woven tinsel leads
Polypropylene dust cap with hot-stamped MB Quart logo
3" Voice coil on glass fiber former with aluminum reinforcement on neck
120oz. Double stacked ferrite magnet
Frequency response: 32-380 Hz
Sensitivity: 85 dB