Subs Not Getting Any Power????

[48chev]

I have 2 Rockford Fosgate punch p2 subs, and an 800w Kenwood amp and a Slinger SLOC. I have the power wire wired to the battery terminal, I have the remote wire running to a switch on the dash, the amp is grounded to the back of the seat.

So I cut into the wires for the rear speakers and ran them in to the LOC and I am getting power out of the RCA cables that come from that. I plugged the RCAs into the “input in” RCA jacks on the amp but from there I am not getting any power out of the amp on the speaker terminals.

The amp has a blue led light that lights up when the remote wire switch is turned on so it is getting power and I used a test light and I’m getting power from the RCAs but why are my subs not working?

I had the subs hooked up directly to the speakers and they moved so I know they aren’t blown.

This is the first time I have done this. Is there anything that I’m missing? Is it the Amp?

Any Help would be greatly appreciated!!

Click to read more...

 

[sjv13 10+ year member]

1) Find a better ground.

2) Is your gain level on the amp turned up?

 

[Peggle]

I had this same problem when i set up my system. Like you, im using rockford fosgates, and im also using a LOC. The problem with mine was the amp. All u have to do is get someone to tune if for you then youll be set //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif