subs dont play music!!!????!!!??!?!?!?!

[RC895 10+ year member]

i tried that and it still is in protect

 

[DaveDSMer 10+ year member]

hmm someone needs to jump in here and pull some magic anti-protect amp tricks. Cause im out of ideas. Only thing I can think of now is check your power and ground connections.. make sure there are no breaks in the wires.. and they are not touching any other terminals or such. Make sure you have a solid ground to bare metal.

 

[RC895 10+ year member]

well ill keep tryin thanks for ur help much appreciated

 

[UndercoverPunk 5,000+ posts]

Amps probably fried. WHere'd you buy it?

 

[jmanpc 5,000+ posts]

Um... unplug the subs and the RCA's. If the amp is still in protect with everything unplugged, then you have issues.

 

[UndercoverPunk 5,000+ posts]

Um... unplug the subs and the RCA's. If the amp is still in protect with everything unplugged, then you have issues.

have you tried unplugging the rcas and speakers then letting it turn on and seeing it if stays in protect? I am pretty sure the way it was wired is what put it into protect now we just got to get it to get off protect.

i tried that and it still is in protect

WORD!

Final check of power ground and remote, still no go, it's still fried. Open it up and look at the burnt spots.

 

[RC895 10+ year member]

so since my amp is most likely fried any sugggestions on good one i can get for under $200

 

[UndercoverPunk 5,000+ posts]

so since my amp is most likely fried any sugggestions on good one i can get for under $200

search the classifieds here. you could get a pretty decent amp for $200, much better than what you got.

 

[RC895 10+ year member]

so i guess this is wat went wrong....watever they are they got burnt out

 

[UndercoverPunk 5,000+ posts]

Those are mosfets. That amp is currently ****ed. If you can read the numbers on the mosfets you can try ordering new ones off of e-bay or from an electronic parts supply house. Then you just uinsolder the old ones, clean the holes up and solder the new ones in. It may fix it, it may not, but in my experiences, it's been worth a shot.

 

[RC895 10+ year member]

any 1 no where i can get those mosfets the only thing i could get off of them was the number and letters K3662?????????????????????????

 

[Atimm693 10+ year member]

Just get a whole new system... This one isnt worth fixing...