Sub pops and buzzes...

shellfish
10+ year member

Senior VIP Member
I hooked up my Fi and my AQ in my car and now I have some noise issues.

I re-did the amp ground so i don't think thats the problem

I check the RCAs with a Ground loop isolator

and it stoped but there was no signal at all.

My last idea is to ground the RCAs but that seems like its a pioneer issue.

the Noise it kind of like alt. whine but it has spikes when i drive,

almost like its from me hitting bumps and stuff.

Also when i change tracks on the CD it reacts to that as well.

What should be my next step in eliminating this problem?

 
my RCAs are in the passenger side and power on driver side.

I changed the grounding location and I'm trying easier ways

to solve this problem before i run a ground wire from the battery.

 
I dont think running the ground to the batery is a good idea. I was always told to run ground from the closest piont possible, and make sure it is grounded to the chasis, frame. Have you checked the remote lead. That small wire tends to get pinched causing amp to flicker on and off and lots other possible issues.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

shellfish

10+ year member
Senior VIP Member
Thread starter
shellfish
Joined
Location
Concord. CA
Start date
Participants
Who Replied
Replies
4
Views
492
Last reply date
Last reply from
subzero
1778578257023.png

Glen Rodgers

    May 12, 2026
  • 0
  • 0
Screenshot_20260511_212804_Amazon Shopping.jpg

Blackout67

    May 11, 2026
  • 0
  • 0

New threads

Top